P3 Ethanol Sensor Voltage Adaptor (ECA/ESVA)

$119.99 CAD

P3 Cars SKU: P3ESVA

P3ESVA

P3 Ethanol Sensor Voltage Adaptor (ECA/ESVA)

Looking for a simple way to read ethanol content DIRECTLY from your ethanol sensor? Your search stops HERE! Introducing the P3 ESVA.
 
P3 Gauges has developed a simple device that will allow you to read information directly from your ethanol sensor.
 
Features:
  • Allows ANY 0-5v linear input gauge to correctly read information directly from Continental/GM style ethanol (FlexFuel) sensor
  • Has two separate outputs (1-ethanol content / 2-fuel temperature)
  • Easy install between ethanol sensor and gauge
  • Taps into signal output of ethanol sensor and wires directly to gauge, 12volt power and ground
  • **Ethanol sensor NOT included**
 
P3 Ethanol SVA (Sensor Voltage Adaptor) Wiring:
  • RED = 12v Power
  • BLACK = Chassis ground
  • WHITE = 50 -150Hz signal input (from ethanol sensor)
  • BROWN = Ethanol content output (0-5volt linear) (connect to brown wire on P3 gauge)
  • BLUE = Fuel temp output (0-5volt linear) (connect to blue wire on P3 gauge)
 
Setup In Configuration Menu Of P3 OBD2 Multi-Gauge V2:
Ethanol content - Analog Input 1 (brown wire on OBD2 harness of P3 gauge)
 
A1.Y
 
A1.DP - “9999.” (no decimal points)
 
A1.Lo - “0”
 
A1.Hi - “100”
 
A1.bL - “0”
 
A1,bH - “100”
 
FUEL TEMP - Analog input 2 (blue wire on OBD2 harness of of P3 gauge)
 
A2.Y
 
A2.DP- “9999” (no decimal points)
 
A2.Lo - “-40”
 
A2.Hi - “257” Fahrenheit (“125” for Celsius)
 
A2.bL - “-40”
 
A2.bH - “257” Fahrenheit (“125” for Celsius)
 
(BOTH ANALOG INPUTS ON P3 GAUGE ARE IDENTICAL AND CAN BE USED INTERCHANGEABLY AS LONG AS CONFIG SETTINGS ARE CORRECT FOR EACH INPUT)
 
**NOTE**
 
If you experience erratic readings, confirm that your ethanol sensor is connected to a known good chassis ground.
 
(it has been found that signal ground cannot always properly support the ethanol sensor)
 
Additional Options (Sold Separately): 
USP E85 Ethanol Flex Fuel Sensor Connector Harness (Required to wire this adaptor to the Flex Fuel Sensor)

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.