{"product_id":"full-turbine-kit-gt5565_bb-r35","title":"FULL TURBINE KIT GT5565_BB R35","description":"\u003cp\u003e\u003cspan\u003e11003-AN019\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSPL FULL TURBINE KIT without\u003cbr\u003ethe TURBINE SUCTION KIT\u003c\/p\u003e\n\u003cp\u003e This product is a kit based on the SPECIAL FULL TURBINE KIT GT5565_BB (Part No. 11003-AN020), excluding the TURBINE\u003cbr\u003eSUCTION KIT (Part No. 14021-A001).\u003cbr\u003e It inherits the signature “symmetrical layout” characteristic of the R35 full turbine kit, and has been newly configured with GT5565_BB\u003cbr\u003especifications.\u003cbr\u003e Minimal vehicle modifications are required, and it supports high-power setups exceeding 1000ps.\u003cbr\u003e At a boost pressure of 200kPa, it delivers a maximum torque of 1380Nm (140kgf·m) at 5000rpm, and a maximum output of 827kW\u003cbr\u003e(1215ps) at 6800rpm.\u003cbr\u003e The addition of a ported shroud helps to suppress surging, significantly improving throttle response and enhancing accelerator control\u003cbr\u003eduring circuit driving.\u003c\/p\u003e\n\u003cp\u003e The exhaust manifold and turbo housing are made from heat-resistant cast steel, ensuring excellent durability even under high-\u003cbr\u003etemperature, high-vibration conditions.\u003c\/p\u003e\n\u003cp\u003eIn the GT1000 and GT1000+ kits, the system was designed for use in combination with the Racing Suction Kit (Part No. 70020-AN107).\u003cbr\u003eHowever, for the Full Turbine Kit, a dedicated Suction Kit (Part No. 14021-AN001) is now offered as a separate option.\u003cbr\u003eNote: The Full Turbine Kit does not include the Φ80–Φ70 air flow adapter.\u003cbr\u003eIf you plan to use it in combination with the Racing Suction Kit (70020-AN107), please make sure to purchase two units of the\u003cbr\u003eair flow adapter separately:\u003cbr\u003e•Product Name: Pipe Suction\u003cbr\u003e•Part No.: G17811-N49080\u003c\/p\u003e\n\u003cp\u003e【Kit Components】\u003c\/p\u003e\n\u003cp\u003e●Component Parts\u003c\/p\u003e\n\u003cp\u003eTurbine GT5565_BB\/ GT5565R_BB\u003cbr\u003eExhaust Manifold Heat-resistant cast steel exhaust manifold with\u003cbr\u003ean outlet inner diameter of 47mm\u003cbr\u003eWastegate GTII D50mm\u003cbr\u003eFront Pipe SUS304 D70mm-D75mm\u003cbr\u003eSuction Pipe Polished aluminum 70mm suction pipe\u003cbr\u003eNote: Air flow adapter is not included.\u003cbr\u003eChamber Pipe Cast aluminum D60mm-D70mm\u003cbr\u003eOthers Replacement Engine Mount (Right Side)\u003c\/p\u003e\n\u003cp\u003e【Precautions】\u003cbr\u003e This product does not include the TURBINE SUCTION KIT.\u003cbr\u003eIf required, please purchase it separately as TURBINE SUCTION KIT (Part No. 14021-AN001) or choose the\u003cbr\u003eSPECIAL FULL TURBINE KIT (Part No. 11003-AN020), which includes it.\u003cbr\u003e Engine removal is required for installation.\u003cbr\u003e The following components are not included in the kit: Fuel pump, injectors, F-CON, EVC, and engine parts.\u003cbr\u003e The factory-set boost pressure of the wastegate is approximately 90–100kPa.\u003cbr\u003e Modification of the stock water pipe is necessary.\u003cbr\u003e Modification of the OEM turbocharger heat insulator is required.\u003cbr\u003e This is a competition-use-only product. We do not provide any warranty for engine, transmission, or other\u003cbr\u003edamage resulting from the installation or use of this product.\u003cbr\u003e As this product is designed to remove the catalytic converter, the vehicle will no longer comply with Japanese\u003cbr\u003eroad safety regulations and cannot be driven on public roads.\u003cbr\u003e This product is not covered under dealer warranty.\u003cbr\u003e To achieve the full performance of this kit, please use the optional Power Flow Filter (gray, single-layer type),\u003cbr\u003esold separately.\u003cbr\u003e ※ This filter is designed for race and trial use only. Do not use it on public roads.\u003c\/p\u003e\n\u003cp\u003e【Related Products】\u003cbr\u003eFULL TURBINE KIT\u003cbr\u003eGT5565_BB for R35 GT-R\u003c\/p\u003e\n\u003cp\u003eParts Product Name Code No. Remarks\u003c\/p\u003e\n\u003cp\u003eRecommended\u003cbr\u003eParts\u003c\/p\u003e\n\u003cp\u003eTURBINE SUCTION KIT 14021-AN001 Power Flow、D70mm suction、\u003cbr\u003eD70mm Air Flow Adapter\u003c\/p\u003e\n\u003cp\u003eCAPACITY UPGRADE KIT 4.3L STEP Pro\u003cbr\u003eBCD 21004-AN024\u003cbr\u003eCONROD BEARING ADUSTMENT VR43\u003cbr\u003eSTEP Pro 24998-AN004\u003c\/p\u003e\n\u003cp\u003eConnecting rod bearing clearance\u003cbr\u003eadjustment and chamfering\u003cbr\u003eservice\u003cbr\u003eAvailable only when purchased\u003cbr\u003etogether with the 4.3L STEP Pro.\u003c\/p\u003e\n\u003cp\u003eCRANK DAMPER PULLEY 24998-AN001\u003cbr\u003eCAMSHAFT+VALVE SPRING SET 22002-AN038 Individual IN\/EX set\u003cbr\u003eFUEL PUMP UPGRADE 14007-AN003 Set of 2, 195 L\/h per unit\u003cbr\u003eHIGH-FLOW SURGE TANK FULL KIT 13008-AN003 Compatible with additional\u003c\/p\u003e\n\u003cp\u003einjectors\u003c\/p\u003e\n\u003cp\u003eINTERCOOLER KIT GT1000SPEC 13001-AN015 Part number 13002-AN004 is\u003cbr\u003erequired for installation\u003cbr\u003eINTERCOOLER FULL PIPING KIT 13002-AN004 SQVIV Included\u003c\/p\u003e\n\u003cp\u003eReplacement\u003cbr\u003eParts POWER FLOW GRAY SINGLE LAYER G04513-\u003cbr\u003eK00410-00\u003c\/p\u003e\n\u003cp\u003ePlease avoid using on public\u003cbr\u003eroads\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":42977652899953,"sku":"HKS11003-AN019","price":31314.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1088\/6742\/files\/medium_11003_AN_019_10_9d021a5ecc.jpg?v=1769553259","url":"https:\/\/www.parkautomotorsports.ca\/products\/full-turbine-kit-gt5565_bb-r35","provider":"Park Auto Motorsports","version":"1.0","type":"link"}