{"product_id":"icok53233","title":"2023+ Sequoia 3-4\" Stage 3 Suspension System","description":"\u003cp\u003eK53233 Overview\u003cbr\u003e\nThe ICON Vehicle Dynamics Stage 3 complete suspension system for the 2023-2025 Toyota Sequoia is our most basic system that features complete ICON threaded-body V.S. 2.5 Series Coilovers in the front, providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires. This system features the innovative new 2.5 EXP series coilover shocks and sway bar drop kit for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear.\u003cbr\u003e\nThe 4-link brackets, upper links, and lower links are sold separately, allowing the 4-link system to be customized for your specific Ford Super Duty year range.\u003cbr\u003e\nStandard\u003cbr\u003e\n+0.75\" Lift over stock\u003cbr\u003e\nRate Option #1\u003cbr\u003e\nRead more\u003cbr\u003e\nKey Features\u003cbr\u003e\nVehicle specific design for 2023-2025 Toyota Sequoia\u003cbr\u003e\n2.5 Series front coilovers with internal reservoirs for superior damping and vehicle control\u003cbr\u003e\nAdjustable front ride heights from 3-3.75” of front lift over stock when used with stock UCAs\u003cbr\u003e\nIncluded sway bar drop brackets reduce bind in OE sway bar links\u003cbr\u003e\nAllows for full wheel travel without overstressing OE components\u003cbr\u003e\nAllows for up to 40% increase in front wheel travel over stock without overstressing OE components\u003cbr\u003e\nDual rate rear coil springs improve performance and ride quality while providing 0\" or 2\" of rear lift, depending on the vehicle's stock suspension package\u003cbr\u003e\n2.0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance\u003cbr\u003e\nAll ICON shock absorbers are fully rebuildable and re-tunable\u003cbr\u003e\nWarranty\u003cbr\u003e\nInstallation Guide\u003cbr\u003e\nCA Residents: Prop 65 Warning\u003cbr\u003e\nWARNING\u003cbr\u003e\nThis product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.\u003cbr\u003e\nSpecifications\u003cbr\u003e\nBrand ICON Vehicle Dynamics\u003cbr\u003e\nUPC 840103421926\u003cbr\u003e\nProxy Number 53233\u003cbr\u003e\nShipping Width 13.00 in\u003cbr\u003e\nShipping Length 31.00 in\u003cbr\u003e\nShipping Depth 7.00 in\u003cbr\u003e\nShipping Weight 102.0000 LB\u003cbr\u003e\nTechnical Notes\u003cbr\u003e\nOEM Wheels \u0026amp; Tires Fitment: Yes\u003cbr\u003e\nRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003cbr\u003e\nRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003cbr\u003e\nRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003cbr\u003e\nAPPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.\u003cbr\u003e\nAPPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.\u003cbr\u003e\nAPPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.\u003cbr\u003e\nAPPLICATION NOTE #148: ICON does not recommend lifting above 2.25\" (Tundra)\/3.75\" (Sequoia) without an ICON upper control arm, failure to do so can result in improper wheel alignment and cause damage to front axles on 4WD models\u003cbr\u003e\nAPPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON diff drop (part# 55156) or using Toyota TRD axles (part# 434200C020 driver \/ 434100C020 pass). Failure to do so could result in front axle damage. Not required for TRD Pro.\u003cbr\u003e\nAPPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles\u003cbr\u003e\nAPPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003cbr\u003e\nAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003cbr\u003e\nAPPLICATION NOTE #188: Not compatible with OE TRD billet front upper control arms regardless of lift height. Vehicles equipped with these will require ICON Delta Joint Pro UCAs (part number 58461DJ or 58561DJ) for fitment.\u003cbr\u003e\nTECH NOTE: Most Sequoia submodels will have front lift height range of 3-3.75” over stock and 2\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-1.75\" over stock and remain at stock height in the rear. If taller rear ride heights are desired, consider kit part number K53233S.\u003cbr\u003e\nSystem Components\u003cbr\u003e\n58670 (qty: 1) | 22-25 TUNDRA\/23-25 SEQUOIA 2.5 VS IR COILOVER KIT\u003cbr\u003e\n55154 (qty: 1) | 22-25 TUNDRA\/23-25 SEQUOIA SWAY BAR DROP KIT\u003cbr\u003e\n56516 (qty: 2) | 22-25 TUNDRA 0-1.5\"\/23-25 SEQUOIA 0-4\" REAR 2.0 VS IR\u003cbr\u003e\n51212 (qty: 1) | 23-25 SEQUOIA 2\" DUAL RATE REAR SPRING KIT\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":42929294082161,"sku":"icoK53233","price":3512.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1088\/6742\/files\/7ae9d96d15699857d224c2082dee3df9.jpg?v=1769013891","url":"https:\/\/www.parkautomotorsports.ca\/products\/icok53233","provider":"Park Auto Motorsports","version":"1.0","type":"link"}