{"product_id":"icok53234t","title":"ICON 2023 Toyota Sequoia 3-4.5in Stage 4 Suspension System Tubular","description":"\u003cp\u003eK53234T Overview\u003cbr\u003e\nThe ICON Vehicle Dynamics Stage 4 complete suspension system for the 2023-2025 Toyota Sequoia builds upon the ICON threaded-body V.S. 2.5 Series Coilovers with the addition of ICON tubular front upper control arms. This system offers improved on- and off-road performance as well as improved alignment specs with front-end lift and leveling for a proper stance and fitment of up to 35\" tires. To compliment the internal reservoir coilover shock and tubular control arm combo, a sway bar drop kit for the front of the truck is included along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear.\u003cbr\u003e\nThe 4-link brackets, upper links, and lower links are sold separately, allowing the 4-link system to be customized for your specific Ford Super Duty year range.\u003cbr\u003e\nStandard\u003cbr\u003e\n+0.75\" Lift over stock\u003cbr\u003e\nRate Option #1\u003cbr\u003e\nRead more\u003cbr\u003e\nKey Features\u003cbr\u003e\nVehicle specific design for 2023-2025 Toyota Sequoia\u003cbr\u003e\n2.5 Series front coilovers with internal reservoirs for superior damping and vehicle control\u003cbr\u003e\nAdjustable front ride heights from 3-4.5” of front lift over stock\u003cbr\u003e\nTubular UCAs for added strength, durability, and alignment correction for better drivability\u003cbr\u003e\nUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003cbr\u003e\nIncluded sway bar drop brackets reduce bind in OE sway bar links\u003cbr\u003e\nAllows for full wheel travel without overstressing OE components\u003cbr\u003e\nDual rate rear coil springs improve performance and ride quality while providing 0\" or 2\" of rear lift, depending on the vehicle's stock suspension package\u003cbr\u003e\n2.0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance\u003cbr\u003e\nAll ICON shock absorbers are fully rebuildable and re-tunable\u003cbr\u003e\nWarranty\u003cbr\u003e\nInstallation Guide\u003cbr\u003e\nCA Residents: Prop 65 Warning\u003cbr\u003e\nWARNING\u003cbr\u003e\nThis product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.\u003cbr\u003e\nSpecifications\u003cbr\u003e\nBrand ICON Vehicle Dynamics\u003cbr\u003e\nUPC 840103421940\u003cbr\u003e\nProxy Number 53234\u003cbr\u003e\nShipping Width 13.00 in\u003cbr\u003e\nShipping Length 31.00 in\u003cbr\u003e\nShipping Depth 7.00 in\u003cbr\u003e\nShipping Weight 127.0000 LB\u003cbr\u003e\nTechnical Notes\u003cbr\u003e\nOEM Wheels \u0026amp; Tires Fitment: Yes\u003cbr\u003e\nRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003cbr\u003e\nRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003cbr\u003e\nRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003cbr\u003e\nAPPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.\u003cbr\u003e\nAPPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.\u003cbr\u003e\nAPPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.\u003cbr\u003e\nAPPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.\u003cbr\u003e\nAPPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles\u003cbr\u003e\nAPPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003cbr\u003e\nAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003cbr\u003e\nTECH NOTE: Most Sequoia submodels will have front lift height range of 3-4.5” over stock and 2\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-2.5\" over stock and remain at stock height in the rear. If taller rear ride heights are desired, consider kit part number K53234TS.\u003cbr\u003e\nSystem Components\u003cbr\u003e\n58670 (qty: 1) | 22-25 TUNDRA\/23-25 SEQUOIA 2.5 VS IR COILOVER KIT\u003cbr\u003e\n58461DJ (qty: 1) | 22-25 TUNDRA\/23-25 SEQUOIA TUBULAR UCA DJ PRO KIT\u003cbr\u003e\n55154 (qty: 1) | 22-25 TUNDRA\/23-25 SEQUOIA SWAY BAR DROP KIT\u003cbr\u003e\n56516 (qty: 2) | 22-25 TUNDRA 0-1.5\"\/23-25 SEQUOIA 0-4\" REAR 2.0 VS IR\u003cbr\u003e\n51212 (qty: 1) | 23-25 SEQUOIA 2\" DUAL RATE REAR SPRING KIT\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":42929292476529,"sku":"icoK53234T","price":4762.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1088\/6742\/files\/40718fe99634ff4939b2729c27790cb0.jpg?v=1769013852","url":"https:\/\/www.parkautomotorsports.ca\/products\/icok53234t","provider":"Park Auto Motorsports","version":"1.0","type":"link"}