{"product_id":"vp51004","title":"Audi TT 8N LHD\/RHD MFD15 Gen2","description":"\u003cp\u003eVP51004\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eUser Manual\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDownload the VAD15 Gen 2 User Manual: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5183\/5545\/files\/VADpro_MFD15-Gen2-manual.pdf?v=1684960357\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDimension and Pin Assignment\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5183\/5545\/files\/pinout-1.webp?v=1684959371\" alt=\"\" width=\"100%\/\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf someone would like to integrate the MFD15 themselves and is fit in the field of CAD design, we offer a STEP\/STL file here, which can be used as a dummy:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.canchecked.de\/wp-content\/uploads\/tri\/CAD_Dummy_MFD15.stl\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCAD_Dummy_MFD15.stl\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.canchecked.de\/wp-content\/uploads\/tri\/CAD_Dummy_MFD15.stp\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCAD_Dummy_MFD15.stp\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eConnection and Expansion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eEach delivery includes:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Connector B (6-way)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Connector C (12-way)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 20cm pre-crimped connection cable for power supply, CAN bus, analog inputs, 5V and sensor ground\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Pins to crimp yourself\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Two 1K resistors (for pull-up for NTC sensors)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAny sensors can be connected via the six analog inputs - we support both linear 0-5V and NTC sensors.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe sensors we offer are usually stored in the TRI files and only need to be connected:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- CC22902 temperature sensor for liquids\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- CC22901 pressure sensor M10x1 0-10 bar (145psi)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- CC22900 pressure sensor 0-5.5bar (80psi)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- generic type K converter 0 -1250°C\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-image\"\u003e\n\u003cfigure class=\"aligncenter size-large\"\u003e\u003cimg data-attachment-id=\"7924\" data-permalink=\"https:\/\/www.canchecked.de\/mfd15-gen2-52mm-can-bus-anzeige\/ains-1\/\" data-orig-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?fit=1512%2C616\u0026amp;ssl=1\" data-orig-size=\"1512,616\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"AINs-1\" data-image-description=\"\" data-image-caption=\"\" data-medium-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?fit=300%2C122\u0026amp;ssl=1\" data-large-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?fit=580%2C236\u0026amp;ssl=1\" width=\"580\" height=\"236\" src=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?resize=580%2C236\u0026amp;ssl=1\" alt=\"\" class=\"wp-image-7924 jetpack-lazy-image jetpack-lazy-image--handled\" data-recalc-dims=\"1\" srcset=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?resize=1024%2C417\u0026amp;ssl=1 1024w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?resize=300%2C122\u0026amp;ssl=1 300w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?resize=768%2C313\u0026amp;ssl=1 768w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?resize=1200%2C489\u0026amp;ssl=1 1200w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/AINs-1.jpg?w=1512\u0026amp;ssl=1 1512w\" data-lazy-loaded=\"1\" sizes=\"(max-width: 580px) 100vw, 580px\" loading=\"eager\"\u003e\\\u003c\/figure\u003e\n\u003ch2\u003e\u003cspan\u003eCC22501 Rotary Knob (optional)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"wp-container-17 wp-block-columns\"\u003e\n\u003cdiv class=\"wp-container-15 wp-block-column\"\u003e\n\u003cp\u003e\u003cspan\u003eThe rotary knob already known from the MFD15 Gen1 is only optional.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt can be used when the front buttons of the display are difficult to reach or when you prefer to use them.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe connection is plug and play directly to connector B on the back of the display. With its 50cm long cable, it can be flexibly accommodated in the vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-container-16 wp-block-column\"\u003e\n\u003cfigure class=\"wp-block-image size-large\"\u003e\u003cimg data-attachment-id=\"7932\" data-permalink=\"https:\/\/www.canchecked.de\/canchecked-mfd15-gen2-drehknopf-poti-turn-knob-encoder\/\" data-orig-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?fit=2048%2C1153\u0026amp;ssl=1\" data-orig-size=\"2048,1153\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"1\"}' data-image-title=\"CANchecked MFD15 Gen2 Drehknopf Poti turn knob encoder\" data-image-description=\"\u0026lt;p\u0026gt;CANchecked MFD15 Gen2 Drehknopf Poti turn knob encoder\u0026lt;\/p\u0026gt;\" data-image-caption=\"\u0026lt;p\u0026gt;CANchecked MFD15 Gen2 Drehknopf Poti turn knob encoder\u0026lt;\/p\u0026gt;\" data-medium-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?fit=300%2C169\u0026amp;ssl=1\" data-large-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?fit=580%2C327\u0026amp;ssl=1\" width=\"580\" height=\"327\" src=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=580%2C327\u0026amp;ssl=1\" alt=\"CANchecked MFD15 Gen2 rotary knob Poti turn knob encoder\" class=\"wp-image-7932 jetpack-lazy-image jetpack-lazy-image--handled\" data-recalc-dims=\"1\" srcset=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?w=2048\u0026amp;ssl=1 2048w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=300%2C169\u0026amp;ssl=1 300w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=1024%2C577\u0026amp;ssl=1 1024w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=768%2C432\u0026amp;ssl=1 768w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=1536%2C865\u0026amp;ssl=1 1536w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=1200%2C676\u0026amp;ssl=1 1200w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?resize=1980%2C1115\u0026amp;ssl=1 1980w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/CANchecked-MFD15-Gen2-encoder-edited.jpg?w=1740\u0026amp;ssl=1 1740w\" data-lazy-loaded=\"1\" sizes=\"(max-width: 580px) 100vw, 580px\" loading=\"eager\"\u003e\n\u003cfigcaption\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Integration\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWe offer tailor-made vehicle integration for many vehicles. This contains:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MFD15 Gen2\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- vehicle-specific holder\/cover in 52mm diameter\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- matching OBD connection cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCurrently available integrations:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Audi A1 8X (incl. S1)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Audi A3 8P (incl. S3\/RS3)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Audi A3 8V (incl. S3\/RS3)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Audi TT 8N (without connection cable)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Audi TT 8J (incl. TT-RS)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- VW Up (incl. GTI)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Skoda Citygo\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- VW Amarok vFL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- VW New Beetle Facelift\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Fiat 500 \/ Abarth 595\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Nissan Skyline GT-R33 (without connection cable)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Mazda MX5\/Miata NC + ND\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Mini Cooper R56\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Ford Fiesta Mk6 + Mk7\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOnline logging of the MFD15 Gen2\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWith the \"Online Logging\" license, your display can log the data into the oDSS, where you can then download it as a file to your smartphone or PC.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll sensors are logged in the log \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e(ATTENTION: with OBD and UDS only the currently displayed ones!)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e . Select the sensors you may want to graph.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-image\"\u003e\n\u003cfigure class=\"aligncenter size-large\"\u003e\u003cimg data-attachment-id=\"7982\" data-permalink=\"https:\/\/www.canchecked.de\/mfd15-gen2-52mm-can-bus-anzeige\/screenshot-2023-03-27-at-13-11-07\/\" data-orig-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?fit=1232%2C1180\u0026amp;ssl=1\" data-orig-size=\"1232,1180\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"Screenshot-2023-03-27-at-13.11.07\" data-image-description=\"\" data-image-caption=\"\" data-medium-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?fit=300%2C287\u0026amp;ssl=1\" data-large-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?fit=580%2C556\u0026amp;ssl=1\" width=\"580\" height=\"556\" src=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?resize=580%2C556\u0026amp;ssl=1\" alt=\"\" class=\"wp-image-7982 jetpack-lazy-image jetpack-lazy-image--handled\" data-recalc-dims=\"1\" srcset=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?resize=1024%2C981\u0026amp;ssl=1 1024w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?resize=300%2C287\u0026amp;ssl=1 300w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?resize=768%2C736\u0026amp;ssl=1 768w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?resize=1200%2C1149\u0026amp;ssl=1 1200w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-13.11.07.png?w=1232\u0026amp;ssl=1 1232w\" data-lazy-loaded=\"1\" sizes=\"(max-width: 580px) 100vw, 580px\" loading=\"eager\"\u003e\u003c\/figure\u003e\n\u003ch2\u003e\u003cspan\u003eIntegrated shift light + warnings\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe internal LED in the top center of the display can be used as a shift light and\/or as a warning LED.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUp to 8 different colors and speed limits are assigned as a shift light, as well as a speed at which the shift light flashes strongly and quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can assign a min and max value for each sensor (in the oDSS via \"Sensors\") and also activate the \"LED\" there. If the sensor is above the maximum value or below the minimum value, the LED flashes quickly in the color specified under \"General Settings\" =\u0026gt; \"LED warning\". The shift light is deactivated during the warning period.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCAN switching and analog forwarding\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe display can be expanded with a license for our \" \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCan Switching\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \". On the one hand, this contains button statuses, which are forwarded via Can Bus (ON\/OFF) and, on the other hand, \" \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eAnalog Forwarding\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \", which the internal analog inputs send via Can Bus.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe display offers emulations for:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– CANchecked \u003c\/span\u003e\u003ca href=\"https:\/\/www.canchecked.de\/mce18\"\u003e\u003cspan\u003eMCE18\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.canchecked.de\/cfe18\"\u003e\u003cspan\u003eCFE18\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan\u003e– Haltech IOA, IOB or IOA+B\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– Ecumaster (Emu v3)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– LinkECU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn the oDSS you can now configure the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCAN switch\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e under \"General Settings\" :\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- left button\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- right button\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- button of the optional rotary knob\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-image\"\u003e\n\u003cfigure class=\"aligncenter size-large\"\u003e\u003cimg data-attachment-id=\"7971\" data-permalink=\"https:\/\/www.canchecked.de\/mfd15-gen2-52mm-can-bus-anzeige\/screenshot-2023-03-26-at-17-52-02\/\" data-orig-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?fit=1270%2C180\u0026amp;ssl=1\" data-orig-size=\"1270,180\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"Screenshot-2023-03-26-at-17.52.02\" data-image-description=\"\" data-image-caption=\"\" data-medium-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?fit=300%2C43\u0026amp;ssl=1\" data-large-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?fit=580%2C82\u0026amp;ssl=1\" width=\"580\" height=\"82\" src=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?resize=580%2C82\u0026amp;ssl=1\" alt=\"\" class=\"wp-image-7971 jetpack-lazy-image jetpack-lazy-image--handled\" data-recalc-dims=\"1\" srcset=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?resize=1024%2C145\u0026amp;ssl=1 1024w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?resize=300%2C43\u0026amp;ssl=1 300w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?resize=768%2C109\u0026amp;ssl=1 768w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?resize=1200%2C170\u0026amp;ssl=1 1200w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-26-at-17.52.02.png?w=1270\u0026amp;ssl=1 1270w\" data-lazy-loaded=\"1\" sizes=\"(max-width: 580px) 100vw, 580px\" loading=\"eager\"\u003e\n\u003cfigcaption\u003e\u003cspan\u003eCan switch in the display\u003c\/span\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe functions are then assigned to these buttons in the control unit. Eg:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– MAP Switch\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– Launch Control\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– Antilag\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– Enable Fan\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e– or others\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-container-22 wp-block-columns\"\u003e\n\u003cdiv class=\"wp-container-21 wp-block-column\"\u003e\n\u003cdiv class=\"wp-container-20 wp-block-columns\"\u003e\n\u003cdiv class=\"wp-container-18 wp-block-column\"\u003e\n\u003cp\u003e\u003cspan\u003eAlternatively, set the \"Encoder button\" to \"Can Switch 1-6\". Here you get an overview of the buttons 1-6 and their current status. By turning the rotary knob, you reach the buttons and you can change the button status by pressing the rotary knob. In the oDSS you adjust the names of the buttons and thus you know exactly which function is active\/inactive.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-container-19 wp-block-column\"\u003e\n\u003cdiv class=\"wp-block-image\"\u003e\n\u003cfigure class=\"aligncenter size-medium is-resized\"\u003e\u003cimg data-attachment-id=\"7976\" data-permalink=\"https:\/\/www.canchecked.de\/mfd15-gen2-52mm-can-bus-anzeige\/screenshot-2023-03-27-at-10-54-37\/\" data-orig-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?fit=980%2C980\u0026amp;ssl=1\" data-orig-size=\"980,980\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"Screenshot-2023-03-27-at-10.54.37\" data-image-description=\"\" data-image-caption=\"\" data-medium-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?fit=300%2C300\u0026amp;ssl=1\" data-large-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?fit=580%2C580\u0026amp;ssl=1\" src=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?resize=227%2C226\u0026amp;ssl=1\" alt=\"Canchecked MFD15 can switch\" class=\"wp-image-7976 jetpack-lazy-image jetpack-lazy-image--handled\" width=\"227\" height=\"226\" data-recalc-dims=\"1\" srcset=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?resize=300%2C300\u0026amp;ssl=1 300w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?resize=150%2C150\u0026amp;ssl=1 150w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?resize=768%2C768\u0026amp;ssl=1 768w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/Screenshot-2023-03-27-at-10.54.37.png?w=980\u0026amp;ssl=1 980w\" data-lazy-loaded=\"1\" sizes=\"(max-width: 227px) 100vw, 227px\" loading=\"eager\"\u003e\n\u003cfigcaption\u003e\u003cspan\u003eCan switch 1-6\u003c\/span\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\" \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eAnalog forwarding\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \" forwards the sensors connected to the display (up to 6) to the control unit - these can be sensors, physical switches, position encoders or others.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eEthanol sensor directly on the MFD15 Gen2\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWith the additional license for the ethanol sensor, you connect a sensor directly to the display. You need a pullup resistor (10K) between 5V and signal.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNow you can view and log both the ethanol content and the fuel temperature.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-image\"\u003e\n\u003cfigure class=\"aligncenter size-large\"\u003e\u003cimg data-attachment-id=\"6576\" data-permalink=\"https:\/\/www.canchecked.de\/downloads\/ethanol-flex-fuel\/sensor\/\" data-orig-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?fit=1154%2C1014\u0026amp;ssl=1\" data-orig-size=\"1154,1014\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"Ethanol Sensor Flex Fuel\" data-image-description=\"\u0026lt;p\u0026gt;Ethanol Sensor Flex Fuel\u0026lt;\/p\u0026gt;\" data-image-caption=\"\u0026lt;p\u0026gt;Ethanol Sensor Flex Fuel\u0026lt;\/p\u0026gt;\" data-medium-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?fit=300%2C264\u0026amp;ssl=1\" data-large-file=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?fit=580%2C510\u0026amp;ssl=1\" width=\"580\" height=\"510\" src=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?resize=580%2C510\u0026amp;ssl=1\" alt=\"Ethanol Sensor Flex Fuel\" class=\"wp-image-6576 jetpack-lazy-image jetpack-lazy-image--handled\" data-recalc-dims=\"1\" srcset=\"https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?resize=1024%2C900\u0026amp;ssl=1 1024w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?resize=300%2C264\u0026amp;ssl=1 300w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?resize=768%2C675\u0026amp;ssl=1 768w, https:\/\/i0.wp.com\/www.canchecked.de\/wp-content\/uploads\/sensor.png?w=1154\u0026amp;ssl=1 1154w\" data-lazy-loaded=\"1\" sizes=\"(max-width: 580px) 100vw, 580px\" loading=\"eager\"\u003e\n\u003cfigcaption\u003e\u003cspan\u003eEthanol Sensor Flex Fuel\u003c\/span\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"VADpro","offers":[{"title":"Default Title","offer_id":43001687015537,"sku":"VP51004","price":667.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1088\/6742\/files\/CC51004_02_1800x1800_a94c207c-664d-4e1b-b64c-916c6c5860bb.webp?v=1770761393","url":"https:\/\/www.parkautomotorsports.ca\/products\/vp51004","provider":"Park Auto Motorsports","version":"1.0","type":"link"}