{"product_id":"xflex-differential-mount-for-2020-ford-explorer-st-ecoboost","title":"xFlex™ Differential Mount for 2020+ Ford Explorer ST EcoBoost","description":"\u003ch2\u003eFord Explorer ST xFlex™ Diff Mount Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 mounting points to the rear differential for maximum support \u0026amp; stabilization.\u003c\/li\u003e\n\u003cli\u003eSuperior EPDM Bushing to reduce vibration \u0026amp; maintain structural integrity.\u003c\/li\u003e\n\u003cli\u003eFluid drain hole access without having to remove the brace\u003c\/li\u003e\n\u003cli\u003eZinc Coated Grade 12.9 \/ Grade 8 bolts \u0026amp; Black Anodized coating for maximum corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eReplaces unreliable factory mount\u003c\/li\u003e\n\u003cli\u003eStep by step color directions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003ch5\u003eWorried about breaking your Differential Mount?\u003c\/h5\u003e\n\u003cp\u003eThe 2020+ Ford Explorer ST \u0026amp; 3.0L Ecoboost SUV’s are amazing vehicles, packed full of performance with lots of torque for towing. Unfortunately the “single-bolt” OE differential support can be prone to failure under load when towing or during hard launches when racing. If the rear axle mounting bolts snap or fracture, the housing becomes partly dislodged from the chassis. This can cause it to make noise and create vibrations. It can also lead to the half-shafts pulling away and becoming dislodged, causing severe damage to your vehicle's drivetrain. The cp-e® differential mount is the epitome of over-engineering, and after you install it, you will never need to worry about this mount ever again. We utilized finite element analysis tools (FEA) to optimize the mount geometry. By placing material in critical areas, we increased the area moment of inertia; a rating of an objects resistance to bending. Our computer-aided evaluation of the mount indicated a three-fold increase in resistance to bending over the stock mount!  \u003c\/p\u003e\n\u003ch5\u003eNO FEAR! LAUNCH \u0026amp; TOWING WITH CONFIDENCE!\u003c\/h5\u003e\n\u003cp\u003eFear not. cp-e® has the solution with our 2020+ Ford Explorer ST Rear Differential Reinforcement kit with fully integrated stabilization system. Our brace FULLY reinforces your Explorer differential case, while improving your vehicles traction! Whether you're just driving daily on the street, at the track or towing your boat, you can be confident knowing your differential is supported and less likely to fail.  \u003c\/p\u003e\n\u003ch5\u003eHIGHEST QUALITY BRACE ON THE MARKET - MADE IN THE USA!\u003c\/h5\u003e\n\u003cp\u003eManufactured from lightweight Military Grade 6061 T6 Billet Aluminum, the ID Speed 2020+ Explorer Differential Brace was designed to handle the extreme forces applied during towing \u0026amp; hard launches. The bushings are 60-duro rubber inserts that positively locate the differential but will not rattle your passenger's teeth out. This unit is a direct replacement for the factory differential mount and comes with everything necessary for a complete installation.\u003c\/p\u003e\n\u003cp\u003eFluid drain hole access without having to remove the brace\u003c\/p\u003e\n\u003cp\u003e4 mounting points to the rear differential for maximum support \u0026amp; stabilization with Grade 12.9 Zinc plated bolts to prevent corrosion.\u003c\/p\u003e\n\u003cp\u003eSuperior EPDM Bushing to reduce vibration \u0026amp; maintain structural integrity.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch5\u003eWHAT MAKES EDPM BUSHINGS SO SPECIAL?\u003c\/h5\u003e\n\u003cp\u003eUnlike nearly all other mounts and brackets from other manufacturers, we use EPDM for our bushings. This provides much more vibration resistance when compared to polyurethane. This material is also extremely resilient and is able to stretch and even develop small cracks without affecting its structural integrity. EPDM is much more expensive to produce, but it is a far superior bushing material. Our metal inserts are physically pressed into our EPDM bushings. This allows the bushing material and the metal to have a perfect connection without any gap. Other manufacturers cut their material out to fit, leaving small tolerances where the metal can still vibrate. Our construction allows the EDPM to absorb the vibrations and allows the metal inserts to smoothly move with the EDPM.\u003c\/p\u003e","brand":"cp-e","offers":[{"title":"Default Title","offer_id":42965691564145,"sku":"FDXM00021B","price":667.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1088\/6742\/files\/FDXM00021B-setMain-2ksq.jpg?v=1769033562","url":"https:\/\/www.parkautomotorsports.ca\/products\/xflex-differential-mount-for-2020-ford-explorer-st-ecoboost","provider":"Park Auto Motorsports","version":"1.0","type":"link"}