A90/91 Supra “GC” Rear Drag Brake Kit

VTT-SUPRA-BRAKE-REAR-2

Product Description

Looking to make your A90/91 Supra faster in the 1/4 mile or 1/2 mile racing? Want to run 17″, or 15″ wheels with a very minor suspension modification? Want to drop 43lbs of unsprung weight off the Rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT “GC” Rear Drag kit for the A90/91 Toyota Supra. This kit will allow you to run the wheel/tire combo you need to drop your ET’s all while putting the car on a significant diet over the stock rear brake set up.

The kit is a true plug-and-play kit using that uses Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor.

NOTE: This kit does NOT retain the stock parking brake, you can code out the parking brake CEL, but this is considered a race kit, and you will lose the rear parking brake function.

This kit comes in 2 different variations

HD Version: Normal street driving, and racing duties

• Genuine SRP Cross Drilled Wilwood Performance rotors or Wilwood GT36 HD rotors
• Genuine Wilwood Dyna-Pro Calipers
• Genuine Wilwood BP-20 Brake Pads
• DOT Approved Brake lines
• VTT CNC Rotor Hats
• VTT CNC Brackets
• Brake Sensor CEL ELiminator harness
• M12X1.5 Suspension Arm Bolt

Race Version: Recommended Race Duties only, not for street use

• Genuine Wilwood Ultra-Lite Scalloped rotors
• Genuine Wilwood Dyna-Lite Calipers
• Genuine Wilwood BP-20 Brake Pads
• DOT Approved Brake lines
• VTT CNC Rotor Hats
• VTT CNC Brackets
• Brake Sensor CEL ELiminator harness
• M12X1.5 Suspension Arm Bolt

Weight saving information

VTT “GC” Dragkit vs OEM Per Side:

• OEM Steel kit 32.2lbs per side – Total 64.4 lbs
• VTT HD Kit GT36 Rotors- 14.6 Lbs per side – 29.2 Lbs total – 35.2 Lbs savings over Stock steel kit ( If coupled with our front kit 96.9Lbs of unsprung weight savings!)
• VTT HD Kit Cross Drilled – 13.4  Lbs per side – 26.8 lbs total – 37.6 Lbs savings over Stock steel kit (If coupled with our front kit 102.8Lbs of unsprung weight savings!)
• VTT Scalloped kit – 10.7 Lbs per side – 21.4 Lbs total – 43 Lbs savings over Stock steel kit!!! (If coupled with our front kit 110.6Lbs of unsprung weight savings!!!!!!)

More weight information:

• HD Rotor GT36- 9 Lbs
• HD Rotor Cross Drilled- 7.8 Lbs
• Scalloped Rotor – 5.1 Lbs
• Dyna Lite Caliper 3.2 Lbs
• DynaPro Caliper 3.6Lbs
• Rotor Hat 1Lb
• Pads (one side) 1.0 Lbs

Disclaimer: The HD kits are designed for some street use, and drag racing ONLY. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving. Always drive within your limits!