Mk4_Low_Mount
Looking to go a little lower in the front of your Mk4 or Audi TT? These Low strut mounts from an early Audi model will give you an extra 5/8" of drop. These are a higher density mount that will last longer than stock ones too! They do require the change to early style strut bearings and strut nuts (included in kit).
Available Options (select above):
Sold as a PAIR
Available Options (select above):
- Short "Half Caps" for upper strut stop. Using factory strut stops will result in large gap between the body and the strut top with these shorter mounts. While Not required we HIGHLY recommend them. The new Half Caps require the transfer of the rubber ring from the stock strut stops. (see pictures below - the rubber rings are NOT available by themselves and NOT included with this option)
- Strut Nut Tool for early style nuts used with these mounts
Sold as a PAIR
This Part Fits The Following Vehicles
| MAKE | MODEL | SUBMODEL | ENGINE | DRIVETRAIN |
|---|---|---|---|---|
| Audi | TT Mk1 (1998-2007) | 1.8T 180HP | FWD | |
| Audi | TT Mk1 (1998-2007) | 1.8T 180HP | Quattro | |
| Audi | TT Mk1 (1998-2007) | 1.8T 225HP | ||
| Audi | TT Mk1 (1998-2007) | 3.2L VR6 | ||
| Volkswagen | Mk4 (1999.5-2005) | 337/20th | 1.8T | |
| Volkswagen | Mk4 (1999.5-2005) | GTI | 1.8T | |
| Volkswagen | Mk4 (1999.5-2005) | Golf | 2.0L | |
| Volkswagen | Mk4 (1999.5-2005) | Golf | TDi | |
| Volkswagen | Mk4 (1999.5-2005) | GTI | 12v VR6 | |
| Volkswagen | Mk4 (1999.5-2005) | GTI | 24v VR6 (2002+) | |
| Volkswagen | Mk4 (1999.5-2005) | Jetta | 12v VR6 | |
| Volkswagen | Mk4 (1999.5-2005) | Jetta | 1.8T | |
| Volkswagen | Mk4 (1999.5-2005) | Jetta | 2.0L | |
| Volkswagen | Mk4 (1999.5-2005) | Jetta | TDi | |
| Volkswagen | Mk4 (1999.5-2005) | Jetta | 24v VR6 (2002+) | |
| Volkswagen | Mk4 (1999.5-2005) | GLI | 1.8T | |
| Volkswagen | Mk4 Golf R32 (2004) | 3.2L VR6 |
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor