Autometer 5inch Kit Box - Tach Speedo Combo / Oil Pressure / Water Temp / Volt / Fuel Level

Product 1204 DESCRIPTION:
Save space on your dash and provide a clean look with AutoMeter’s Electronic Tach/Speedo Combo. Taking the highly precise circuits from the individual speedometer and tach and combining them into one unit gives you the accuracy and the response time you need and the convenience of a one piece solution. Compatible with nearly any factory speed sender and 1-12 cylinder applications, this unit is simple to calibrate and designed with the type of durability you expect in an AutoMeter gauge. AutoMeter’s GPS Speed Sender is also compatible for an easy, plug and play solution.
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Modern white LED through-the-dial lighting provides clear visibility during nighttime use
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO COMBO, 240-33 Ω, DESIGNER BLACK II
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
7
Questions
6
Answers
Questions
Ask a question
1–7 of 7 Questions
Sort by:
▼
Menu
Nomadtrebor
· 2 years ago
Are there compatible sending units for a 57 Ford 312 for Speedo (automatic transmission) and distributor driven Tachometer?
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
The tachometer should simply connect to coil negative.
Your speedometer should use one of these two senders, depending on the fitting on your transmission:
https://www.autometer.com/hall-effect-speedometer-sender.html
https://www.autometer.com/hall-effect-speedometer-sender-ford-plug-in.html
Helpful?
Yes · 0
No · 0
Report
George21
· 5 years ago
what about the warning lights ? are there any (low fuel , oil, temp) on the instrument? if not , is there an output to connect external? thanks
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. These gauges have no warning lights or any output to drive a warning light.
Helpful?
Yes · 0
No · 0
Report
Mendez509
· 5 years ago
Would it work with a LS swap
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. This is a universal kit but you will need to purchase P/N: 5284 and P/N: 9117/9123 depending on he year of the motor. For further assistance please call our tech line at 866-248-6357.
Helpful?
Yes · 0
No · 0
Report
Ray C
· 5 years ago
Do you have this combo with a 0-90 Ω fuel gauge?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Ray,
Unfortunately we do not offer this in a kit. You would need to purchase P/N: 1291 and 1224.
Helpful?
Yes · 0
No · 0
Report
A1977
· 7 years ago
Would these work with a mechanical speedometer? (1977 Corvette)
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. This should absolutely work with the transmission on your Corvette. It comes with a pulse generator that will screw onto the tailhousing in place of your cable which drives the speedometer. You can see what it looks like here:
https://www.autometer.com/speed-sensor-mech-to-elec-gm-chrysler-7-8-18-thread-sine-wave-8-pulse.html
Hope this helps!
Helpful?
Yes · 1
No · 0
Report
Rob79
· 7 years ago
Can I get this combo set up with KPH speedo?
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi Rob, thank you for connecting with us. At this time there are no Tachometer/Speedometer combos in KPH and also no styles that would match a Quad Gauge. However, in our http://www.ampcustomshop.com/ you can create a 5" KPH Speedometer with a matching Quad Gauge.
Helpful?
Yes · 0
No · 0
Report
porkchop
· 4 years ago
will these gauge set work with holley terminator X max #550-927 on ls engine
0
answers
Answer this Question
Ask a question
You may also like:
RPM SIGNAL ADAPTER FOR LS ENGINES, INCL. PLUG & PLAY HARNESS
Product #9123
$182.83
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" PRNDL, P,R,N,D,L,OD,O,5,4,3,2,1, BLACK/CHROME
Product #1460
$258.24
GAUGE INSTALL KIT FOR LS ENGINES, INCL. FITTINGS, SHORT TEMP SENSOR, MANUAL
Product #5284
$44.99
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
Also Purchased With
2 PC. GAUGE KIT, 5" QUAD & SPEEDOMETER, 240-33 Ω, OLD TYME WHITE II
Product #1203
$718.83
2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE BLK. DIAMOND
Product #2005
$831.85
5" QUAD GAUGE, 8K RPM/120 MPH/100 PSI/100-250 °F/8-18V/240-33, AMERICAN MUSCLE
Product #1205
$863.06