Autometer American Muscle SSE 100PSI/100-250 Deg F/8-18 Volt Oil Press/Water Temp/Volt/Fuel Gauge

Product 1225 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 0 ohms empty to 90 ohms full (compatible with Amid 60’s through mid 90’s GM fuel level senders).
Feature Points
Modern white LED through-the-dial lighting provides clear visibility during nighttime use
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Gauge kit includes 1/8” NPT pressure sender, 1/4” NPT adapter, 1/8” NPT temperature sender, 3/8” and 1/2" NPT adapters, mounting hardware, and detailed instructions for installation
Ships With
Includes Sending Unit: Oil Sender 2242 - Water Sender 2258
3/8" NPT and 1/2" NPT adapter fittings
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/0-90 Ω, AMERICAN MUSCLE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
7
Questions
7
Answers
Questions
Ask a question
1–7 of 7 Questions
Sort by:
▼
Menu
kenworth
· 11 months ago
What is the difference between gauge #1225 and gauge #1212.
1
answer
Answer this Question
Steve from AutoMeter · 11 months ago
P/N: 1225 uses a 0-90ohm fuel level gauge.
P/N: 1212 uses a 240-33ohm fuel level gauge.
Helpful?
Yes · 0
No · 0
Report
Grassy
· 3 years ago
Will American Muscle quad setup work in my 1969 Chevelle stock dash with astro no air? wish to have speedometer/tachometer on left side and oil,volts,temp.and fuel on right side?
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
This would be a universal 5" gauge that would fit in a 4-5/8" in dash hole. This will work with your engine, and we do have several Chevelle mounting solutions available.
Helpful?
Yes · 0
No · 0
Report
David’s
· 5 years ago
Is this availability in metric for Australia
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
David,
Thank you for your question. Unfortunately this gauge is not offered in that style. For further assistance please give our tech line a call at 815-895-8141.
Helpful?
Yes · 0
No · 0
Report
Big foot
· 7 years ago
Hi will.this fit on my 51 Chevy truck Im doing update to my truck 350 with Auto trans the hole nine yards. So Im goi g to need the speedometer and 4 Quad gauge. Thanks.
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. The factory dash openings in your truck are very slightly larger than the gauges are. We offer this adapter kit that will allow you to drop them right into the factory locations without any modification:
https://www.autometer.com/direct-fit-dash-insert-chevy-truck-47-53-2-gauge-billet.html
Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Watersmeet
· 7 years ago
As a follow up to my earlier question, I believe I found one of your smaller dia 4 in one gauges with an available pod. If so can you direct me to it. Jim
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. Here is a link to the available 3-3/8" quad gauges in our lineup:
https://www.autometer.com/catalogsearch/result/?q=3-3%2F8%22+QUAD#1&profile=products
We also have the ability to customize them via the AutoMeter Custom Shop:
https://www.ampcustomshop.com
You would be able to place them in one of these two cups:
https://www.autometer.com/catalogsearch/result/?q=3-3%2F8%22+cup#1&profile=products
Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Watersmeet
· 7 years ago
Is there a pod and mounting bracket for the same available? Jim
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. Unfortunately, AutoMeter 5" in-dash gauges are designed only to be mounted in the dash. We do not offer a mounting pod that would be compatible. Sorry for the bad news.
Helpful?
Yes · 0
No · 0
Report
Daveer
· 7 years ago
What size hole will this need to fit? How does it mount?
1
answer
Answer this Question
Joseph Mills · 7 years ago
Thank you so much for contacting us. This gauge fits into a 4-5/8" hole. Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
Also Purchased With