AutoMeter Gauge Kit 2 Pc. Quad & Speedometer 5in. Chevrolet Heritage Bowtie

Product 1303-00408 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" FUEL LEVEL, 240-33 Ω SSE, CHEVROLET HERITAGE BOWTIE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
5
Questions
5
Answers
Questions
Ask a question
1–5 of 5 Questions
Sort by:
▼
Menu
Wolf75
· 7 months ago
The backlighting is very dim. Enough to where I can't read the gauges at night. I have the light knob turned as far as it will go. Can I use LED bulbs instead of the incandescent bulbs?
1
answer
Answer this Question
Steve from AutoMeter · 7 months ago
You can always upgrade to an LED bulb using any of our T3 wedge LED bulbs. We do offer a few different color options as well (Blue, Red, Green, White, and Amber).
Helpful?
Yes · 0
No · 0
Report
bryan803
· 6 years ago
will this gauge work on my 52 chevy pickup and my fuel sender is 0 to 33 ohms will 240-33 work as well.gauge number 1303-00408
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Hi Bryan, thank you for reaching out to us. The 1303-00408 is only available with a 240-33 meter and would require a 240-33 ohm sender.
Helpful?
Yes · 0
No · 0
Report
TomD
· 7 years ago
Can I purchase the 5" quad gauge separately?
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi Tom, thank you for the question. The Chevy labeled Quad Gauge is not available individually. Only in the Quad/Speedometer kit. We offer the standard AutoMeter style separately as model 1310 or 1319 (GM fuel level).
Helpful?
Yes · 0
No · 0
Report
kwar7097
· 7 years ago
I have a 1303 gauge set. I did the calibration after installation. but I still don't get any speed reading on my speedometer. Can you give me any help. The kit came with a 2 wire sensor and the instructions are a little confusing. Thanks; Karl
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi Karl, thank you for connecting with us. This will require some additional dialogue and troubleshooting with our Technical Support Team. I would recommend giving us a call at 866.248.6356, hitting the Chat link at the top of the page or emailing us here:
http://www.autometer.com/resources/index/ask_a_question
Helpful?
Yes · 0
No · 0
Report
Louis
· 7 years ago
I see it's a 5" Gauge, but what are the dimensions? Do you have a diagram of the dimensions ? What size hole does this fit??
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi Louis, thank you so much for the question. We have a few exceptions throughout the line, but most 5" in-dash, including this model, will mount into a 4-5/8" diameter hole. Here is a link to our dimensions: https://www.autometer.com/media/dimensions2014.pdf
The G2 spec would represent the Quad Gauge and Speedometer in this kit.
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
CONNECTOR, WIRING, 8 TERMINAL, FOR ELEC. IN-DASH TACH OR SPEEDOMETER
Product #3299
$18.40
GAUGE INSTALL KIT FOR LS ENGINES, INCL. FITTINGS, SHORT TEMP SENSOR, MANUAL
Product #5284
$44.99
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
Also Purchased With
2 PC. GAUGE KIT, 5" QUAD & SPEEDOMETER COMBO, 240-33 Ω, ARCTIC WHITE
Product #1303
$591.33
2 PC. GAUGE KIT, 5" QUAD & SPEEDOMETER, 240-33 Ω, OLD TYME WHITE II
Product #1203
$718.83
2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE PEARL
Product #2008
$813.74