Autometer Designer 5in In-Dash Kit Box- Speedo & Elec Oil Press, H2O Temp, Volt, Fuel

Product 1403 DESCRIPTION:
Save space on your dash and provide a clean look with AutoMeter’s Electronic Tach/Speedo Combo. Taking the highly precise circuits from the individual speedometer and tach and combining them into one unit gives you the accuracy and the response time you need and the convenience of a one piece solution. Compatible with nearly any factory speed sender and 1-12 cylinder applications, this unit is simple to calibrate and designed with the type of durability you expect in an AutoMeter gauge. AutoMeter’s GPS Speed Sender is also compatible for an easy, plug and play solution.
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2 PC. GAUGE KIT, 5" QUAD & SPEEDO, ELECTRIC, 240-33 Ω, DESIGNER BLACK
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
3
Questions
3
Answers
Questions
Ask a question
1–3 of 3 Questions
Sort by:
▼
Menu
Scrape
· 5 years ago
Good afternoon, I’m in Australia, do you have the speedo available in klm (metric) in the 5” Cheers Mark
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi Scrape,
The Designer Black speedometer in this kit is only available in a MPH version. For Km/H versions in other lines, type "metric" in the search box on our home page.
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
Rga57
· 6 years ago
will these work in a 1948 chevy truck
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. While none of our gauges are vehicle specific, and are not made to fit any OEM holes. These gauges would certainly work in your application, if you provided a mounting solution.
Helpful?
Yes · 0
No · 0
Report
Robbie2099
· 7 years ago
Good afternoon I own a 1951 chevy pickup 5 window and have a 700r4 trans will these gauges be compatible with it or do you sell an adapter i can use to hook everything up electronically
1
answer
Answer this Question
Joseph Mills · 7 years ago
Hi Robbie, thank you so much for contacting us. If you've got an older 700R4 transmission that used a cable to drive the speedometer, you're still in luck. This kit comes with an adapter that will replace the cable on your trans and drive the programmable speedometer. Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
Also Purchased With
2 PC. GAUGE KIT, 5" QUAD & SPEEDOMETER COMBO, 240-33 Ω, ARCTIC WHITE
Product #1303
$591.33
2 PC. GAUGE KIT, 5" QUAD & SPEEDO, ELECTRIC, 240-33 Ω, OLD TYME BLACK
Product #1703
$600.83
5 PC. GAUGE KIT, 3-3/8" & 2-1/16", ELECTRIC SPEEDOMETER, DESIGNER BLACK II
Product #1201
$621.66
2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE BLK. DIAMOND
Product #2005
$831.85
5" QUAD GAUGE, 8K RPM/120 MPH/100 PSI/100-250 °F/8-18V/240-33, AMERICAN MUSCLE
Product #1205
$863.06