Autometer 5 inch Antique Beige 2 Piece Gauge Kit - Quad & Speedometer

Product 1803 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
3/8" NPT and 1/2" NPT adapter fittings
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2 PC. GAUGE KIT, 5" QUAD & SPEEDO, ELECTRIC, 240-33 Ω, ANTIQUE BEIGE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
12
Questions
12
Answers
Questions
Ask a question
1–10 of 12 Questions
Sort by:
▼
Menu
wause
· 3 years ago
does this set have turn and high beam indicator in them ?
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
This set does not have any indicators on them.
Helpful?
Yes · 1
No · 0
Report
SoccerGuy3
· 4 years ago
I really like the looks of these gauges, do you offer a version with an integral tach? Like item #1820 "2 PC. GAUGE KIT, 3-3/8" QUAD & TACH/SPEEDO, 240-33 Ω, ANTIQUE BEIGE".
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. The only version we offer with the Speedo/Tach combo in Antique Beige would be model #1820 if you were looking for a kit or 1881 if you were looking for an individual gauge.
Helpful?
Yes · 0
No · 0
Report
Trucker 47
· 5 years ago
Hello... I have 2 questions 1st, I have a 47 chevy pick up and the id measurements for the gauge holes are showing 5 1/8". Will your set fit this or is there an adaptor made? 2nd, is the set, preferably the speedo electric?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi,
You will need this 7039 adapter kit for your 1947 Chevy truck.
https://www.autometer.com/direct-fit-dash-insert-chevy-truck-47-53-2-gauge-billet.html
Th entire gauge kit is electric.
Thanks,
Jim
Helpful?
Yes · 1
No · 0
Report
Darrin
· 5 years ago
Can these come in KPH?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi Darrin,
Unfortunately this speedometer is available in MPH only.
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
Tony j
· 5 years ago
I have the two peice set of gauges the quad one is speed o and the other is a water, oil,temp,amps they were in a 1951 chevy truck I bought .I need to celebrate the gauges but I do not have any instructions. Is a way to get instructions
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. The instructions for this are linked below:
https://www.autometer.com/media/manual/2650-1266.pdf
https://www.autometer.com/media/manual/2650-1178.pdf
https://www.autometer.com/media/manual/2650-1192.pdf
Helpful?
Yes · 1
No · 0
Report
53BSpecial
· 5 years ago
I would like to know what size opening this gauge will fit into.
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. The hole size needed is 4-5/8" for both units.
Helpful?
Yes · 0
No · 0
Report
higgy
· 5 years ago
I am working on a 49 dodge truck. It has two 5 inch holes in the dash that I would like to put your gages in. My concern is the mounting. I have looked at your site several times but find the dimensional information on mounting. do you have a catalog
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. Please use the link provided for the gauge dimensions https://www.autometer.com/media/dimensions2014.pdf. For further assistance please call our tech line at 866-248-6347.
Helpful?
Yes · 1
No · 0
Report
LARRY77
· 5 years ago
Can I get the quad gauge set (antique beige 3 3/8") with a Ford Compatable electric speedometer (I am using a 5R55E transmission) or a GPS Speedometer?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. Unfortunately we do not offer a kit with the 5292 speed sensor. You will need to purchase P/N: 5292 or go with our GPS module P/N: 5289.
Helpful?
Yes · 0
No · 0
Report
Mark52
· 6 years ago
How do you remove the light bulbs in the quad gauge to change their color
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. There should be two bulbs that twist into the back of the gauge. You will either be able to see both twist knob backs for the lights or there will be two black caps on the back of the casing which you can remove with a flathead screwdriver and the bulb sockets will be under those.
Helpful?
Yes · 0
No · 0
Report
WESTSIDE
· 6 years ago
I WANT TO USE TIS IN A VEHICLE THA ONLY HAS AN ELECTRONIC OUT PUT FOR THE SPEEDOMETER WILL THIS WORK
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Yes, this speedo will work on any late model VSS or speed sensor coming off your transmission.
Helpful?
Yes · 0
No · 0
Report
1–10 of 12 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
Also Purchased With
2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE ANTQ. IVORY
Product #2004
$876.86