Autometer Antique Beige 5-Gauge Kit 3-1/8in Electrical Speedometer 190KPH

Product 1809-M DESCRIPTION:
AutoMeter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
3/8" NPT and 1/2" NPT adapter fittings
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5 PC. GAUGE KIT, 3-1/8" & 2-1/16", ELECTRIC SPEEDOMETER, KM/H, ANTIQUE BEIGE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
18
Questions
18
Answers
Questions
Ask a question
1–10 of 18 Questions
Sort by:
▼
Menu
bob2020
· 3 years ago
Is there a tach that matches and can I get 10-180 fuel gauge
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
We do have a few tachs in the Antique Beige line, like the 1898. As far as the fuel gauge, we have a 16-158 but if you have a 10-180, we would recommend looking at getting the 9109 Fuel Bridge to work with this 5 Piece Kit.
Helpful?
Yes · 0
No · 0
Report
D king
· 3 years ago
Have a 1965 ford econoline 2.16 volts and such ,but speedo is 4 inch do you have anything
1
answer
Answer this Question
Matt from AutoMeter · 3 years ago
Unfortunately we don't have a 4 inch speedometer except in our Cobra replica reverse rotation. In this series you could only get options to fit into 3-1/8, 3-3/8, and 4-5/8 inch diameter holes.
Helpful?
Yes · 0
No · 0
Report
Mapuser73
· 3 years ago
I would like to replace my 2005 2500 dodge sprinter van instrument cluster with your devices. Will they work? Thank you for your time
1
answer
Answer this Question
Jim from AutoMeter · 3 years ago
This gauge kit can be adapted to your sprinter, but will require extra components. You will need a 9117 tach adapter, and a 9109 Fuel Bridge. You will also need to fabricate a dash panel to mount this kit into your dash.
Helpful?
Yes · 0
No · 0
Report
Alex1970
· 3 years ago
good morning, will this set work with 84 cj7 258 6 cy in line?.
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Our gauges would be compatible with your engine, but you may have some challenges with your stock fuel level resistance not matching this gauge, which would require you to either replace your fuel level sender with the one included in the kit, or you can use our 9109.
Helpful?
Yes · 0
No · 0
Report
Pontiac
· 3 years ago
Vil the speedometer work with gps signal
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for contacting us. The electronic speedometer in the Jeep series is compatible with our 5289 GPS module. Alternatively, while it wouldn’t have the Jeep logo, we offer model 2480 in our Traditional Chrome Series, which is a “native” GPS speedometer. This series matches the Jeep series, except for the logo.
Helpful?
Yes · 0
No · 0
Report
BUZ BUZ
· 3 years ago
Will these gauges fit F 600 Dump Truck?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Hello, thank you for contacting us. They are a universal gauge set and can work as long as all the sensors connected that is needed.
Helpful?
Yes · 0
No · 0
Report
Ramguy
· 3 years ago
Own a 1991 Dodge Power Ram D150. I love theses gauges but they are not compatible with my current dash board. Is there a dash board available to both fit my truck and accommodate these gauges?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for your question. We unfortunately do not have a panel.
Helpful?
Yes · 0
No · 0
Report
hermdogg
· 4 years ago
I have a Ford F 100 1955 pick up 351 Windsor engine w/ C4 auto trans will this Autometer 5 pc work in my application
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. This will work. You will need to use the sending units that come with the oil pressure, water temp, and fuel level gauges. As for the speedometer and tachometer, you can use the distributor and VSS from the transmission.
Helpful?
Yes · 0
No · 0
Report
Russ 3000
· 4 years ago
I would like to purchase this set plus matching tack and wiring harness. Can you add what I need to instal this in my mgtd kit car. I have a Toyota naturally aspirated 22r (1981). Engine does have all the sensors but not sure if they will match.
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. You will need P/N: 1898 and P/N: 2198.
Helpful?
Yes · 0
No · 0
Report
steve62
· 5 years ago
Want this set for my '62 VW Bug. Can I get an "Oil Temperature" gauge instead of a "Water Temperature" gauge? The set is PERFECT for my application. And if not... will the water temp sensor read the temp of the oil as it would water?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for you question. Unfortunately we do not offer a oil temp gauge in this series. However the water temp gauge will work the same to measure the oil temp of your vehicle.
Helpful?
Yes · 0
No · 0
Report
1–10 of 18 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
ADAPTER PLATE, FOR 5 BOLT FUEL LEVEL SENSOR TO 6 BOLT MOUNTING FLANGE
Product #3263
$40.95
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2277
$16.69
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2268
$15.68
SENSOR, TEMPERATURE, 1/8NPTF MALE, SHALLOW DEPTH, SHORT SWEEP ELEC.
Product #2259
$21.70
LED BULB, REPLACEMENT, T3 WEDGE, WHITE
Product #3288
$13.72