Product 2005 DESCRIPTION:
Save space on your dash and provide a clean look with AutoMeter’s Electronic Tach/Speedo Combo. Taking the highly precise circuits from the individual speedometer and tach and combining them into one unit gives you the accuracy and the response time you need and the convenience of a one piece solution. Compatible with nearly any factory speed sender and 1-12 cylinder applications, this unit is simple to calibrate and designed with the type of durability you expect in an AutoMeter gauge. AutoMeter’s GPS Speed Sender is also compatible for an easy, plug and play solution.
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Modern white LED through-the-dial lighting provides clear visibility during nighttime use
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
3/8" NPT and 1/2" NPT adapter fittings
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE BLK. DIAMOND
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
8
Questions
8
Answers
Questions
Ask a question
1–8 of 8 Questions
Sort by:
▼
Menu
Anonymous · 8 months ago
Are these compatible with the newer Ls Motors (L83) from the 2020 and newer trucks? Can you program it with the mileage on the truck that it's going in?
1
answer
Answer this Question
Alex at AutoMeter · 8 months ago
Thank you for your question. This gauge isn't going to plug and play with an LS. You would at least need our 5284 adapter kit and may need a 9117 tach adapter. I would recommend giving our tech team a call so we can explain. Mileage can be added to the odometer.
Helpful?
Yes · 0
No · 0
Report
Ed01
· 2 years ago
Will these gauges fir directly into my 1951 GMC dash? Thanks.
1
answer
Answer this Question
Alex at AutoMeter · 2 years ago
These gauges are not designed to fit directly in the OEM dash. You would need something like part number 7038 to secure them.
Helpful?
Yes · 0
No · 0
Report
evilokc
· 5 years ago
is the odometer programable so i can keep the total mileage of the vehicle correct?evilokc
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. You will need to send the speedometer into us for the mileage change on the odometer which can take up to 2 weeks to get done. The charge to get this done is $25 USD +shipping to get back to you. You can fill out the form in this link and ship the unit to us to get this done.
https://www.autometer.com/media/Service_Form.pdf
Helpful?
Yes · 0
No · 0
Report
Artur
· 6 years ago
Hi. Can you make a speedometer calibrated in km/h? Thanks for answer.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. This speedometer is not available in a KMH version. You can make this display KMH by driving 2 Kilometers during your calibration drive rather than 2 miles. However, there is no way to screen the dial face to say KMH"
Helpful?
Yes · 0
No · 0
Report
NHL 71
· 7 years ago
Are there turn signal indicators?
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. Neither this set, nor any of our automotive gauges have turn signals integrated into the gauges. Sorry for the bad news.
Helpful?
Yes · 1
No · 0
Report
Gids
· 7 years ago
Will this gauge work with Sensor Module,GPS speedometer interface GPS Antenna
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi there, thank you so much for the question. Yes, the Prestige Black Diamond Speedometer is compatible with our 5289 GPS Speedometer Module.
Helpful?
Yes · 1
No · 0
Report
Gustavo
· 7 years ago
Other question...I didn´t see in this model where it registers the accumulated km (or mileage). Isn´t there for this model?
1
answer
Answer this Question
Joseph From AutoMeter · 7 years ago
Hi Gustavo, thank you so much for contacting us. The odometer is directly above the "MPH" on the tach/speedo combo. Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Gustavo
· 7 years ago
Dear friend, is it possible to customize for example from MPH to km/h? And how about the pointer color, is it possible to be red? Thanks.
1
answer
Answer this Question
Joseph From AutoMeter · 7 years ago
Hi Gustavo, thank you so much for contacting us. While a large percentage of our instruments can be customized, this set unfortunately is a static configuration and is not available either in metric scale or with a red pointer. Sorry for the bad news.
Helpful?
Yes · 1
No · 0
Report
Ask a question
You may also like:
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2268
$15.68
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2277
$16.69
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM
Product #2283
$62.14
RPM SIGNAL ADAPTER FOR DISTRIBUTORLESS IGNITIONS
Product #9117
$113.58
Also Purchased With
2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE ANTQ. IVORY
Product #2004
$876.86
2 PC. GAUGE KIT, 5" QUAD & TACH/SPEEDO, ELECTRIC, 240-33 Ω, PRESTIGE PEARL
Product #2008
$813.74
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor