Autometer Universal Gauge Wiring Harness Kit for Tach/Speedo/Elec Gauges Including Led Indicators

Product 2198 DESCRIPTION:
Ready to upgrade the instrumentation in your hot rod, but finding the wiring a bit daunting? AutoMeter has you covered with their Universal Gauge Wire Harness. Pre-terminated and color coded with detailed installation instructions, this product provides everything you need to wire a standard 5 or 6 instrument set, including turn signal and high beam LEDs!
Feature Points
Accomodates 5 or 6 gauge installations consisting of any AutoMeter In-Dash Tachometer, Speedometer, and four short sweep electric, air-core gauges (Fuel Level, Oil Pressure, Water Temperature, and Voltmeter)
Color coded and pre-terminated for simpified installation.
Includes: Main Wire Harness (gauge side and vehicle side with pre-terminated multi-pin separation connectors), Lighting Ground Wire Harness, 8 butt connectors, 8 crimp connectors, 2 green turn signal LEDs, 1 amber high beam LED, 1 red brake or check engine LED.
Not intended for use with the following AutoMeter gauge types: Digital Stepper Motor, Digital Display, Dual Gauge, Mechanical, Quad Gauge, or Tach/Speedo Combo.
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
1–6 of 6 Reviews
?
Sort by: Most Relevant
▼
Menu
≡
Filter Reviews
Clicking on the following button will update the content below
Portland, OR, United States
Review 1
Votes 5
*
Verified Purchaser
★
Top 25 Contributor
★★★★★
★★★★★
5 out of 5 stars.
Gauges work and look much better than expected.
Love these gauges. Definitely order the wiring harness. It made a two day project into a 12 hour day. I would also suggest getting a LabelMaker. Label all your wires before you cut them from your existing harness.
I also ordered a Classic Dash to house my new gauges. It’s pretty much plug-and-play. I have a 69 Camaro and had a trim some of my dash pad.
I did not use the LED indicator lights that were included with the wiring harness. I ordered much nicer LED indicators from Amazon.
1969 Camaro Before.
Photo This action will open a modal dialog.
1969 Camaro during...
Photo This action will open a modal dialog.
1969 Camaro after.. love the new look!
Photo This action will open a modal dialog.
1969 Camaro... So nice!
Photo This action will open a modal dialog.
Helpful?
Yes · 5
No · 0
Report
Salem nh
Review 1
Votes 0
*
Verified Purchaser
★★★★★
★★★★★
5 out of 5 stars.
Saves a ton of headache
Bought a six guage setup for my car...went to begin installing it and found I would have to make a harness. Went back online and the plug in harness. Wish someone told me when I purchased my guages.
Worked great
Recommends this product ✔ Yes
Review photo 1.
Photo This action will open a modal dialog.
Helpful?
Yes · 0
No · 0
Report
Minnesota
Reviews 2
Votes 0
★★★★★
★★★★★
5 out of 5 stars.
easy wiring
I really didn't need to replace my gauge wiring, but this kit let me eliminate a lot of extra wires under my dash and made it very easy to hook up the gauges plus it gives me just one plug to use if I ever need to remove the instrument panel
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Pembroke Pines Fla
Review 1
Votes 0
*
Verified Purchaser
★★★★★
★★★★★
5 out of 5 stars.
Amazing
This make it so much easier to install the gauges in the dash
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Weatherford, TX
Review 1
Votes 0
*
Verified Purchaser
★★★★★
★★★★★
5 out of 5 stars.
Gauge set wiring harness
A real timesaver, worth the money. Great customer service.
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Tennessee
Review 1
Votes 0
*
Verified Purchaser
★★★★★
★★★★★
5 out of 5 stars.
Worth the money!
Worth the money! saves a lot of time. good instructions,
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
5 out of 5 stars. Read reviews for GAUGE WIRE HARNESS, UNIVERSAL, FOR TACH/SPEEDO/ELEC. GAUGES, INCL. LED INDICATORS
5.0
6 Reviews
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
6
Reviews
20
Questions
26
Answers
Questions
Ask a question
1–10 of 20 Questions
Sort by:
▼
Menu
MoonKnight_YJ
· 11 months ago
Does this include the wires to go to the sensors that place on the motor? Such as oil pressure, trans temp, water temp?
1
answer
Answer this Question
Steve from AutoMeter · 11 months ago
The harness does have color coded wires designated to certain gauges signal input. You can then use those color coded wires to connect to the proper sending unit that applies to said gauge. For further assistance please give us a call at 866-248-6356.
Helpful?
Yes · 2
No · 0
Report
TysToyz
· 11 months ago
Hello, will this harness work with the American muscle electric 5piece gauge set.
1
answer
Answer this Question
Alex at AutoMeter · 11 months ago
Thank you for your question. This universal harness will work with the American Muscle 5 piece set.
Helpful?
Yes · 0
No · 0
Report
da46
· a year ago
I have gauge set 3182-1809 what harness can I use thank you
1
answer
Answer this Question
Alex at AutoMeter · a year ago
Thank you for your question. This is our universal wiring harness which will work with most of our short sweep electric gauge kits including kit number 1809.
Helpful?
Yes · 0
No · 0
Report
Bandaid
· a year ago
how do you calibrate the speedometer with the invision dash in a 1987 Chevy Monte Carlo?
1
answer
Answer this Question
Alex at AutoMeter · a year ago
Thank you for your question. The invision speedo calibration is performed with a 2 mile calibration trip. The instructions on how to put the dash in calibration mode can be found on page 5 of the instructions. They can be found at: https://www.autometer.com/pub/media/manual/2650-1994-77rA.pdf
Helpful?
Yes · 0
No · 0
Report
Young
· a year ago
Do you offer a wiring harness compatible to use with auto meter gauge set 1820 Thamks. Ed
1
answer
Answer this Question
Steve from AutoMeter · a year ago
Ed,
Unfortunately we do not. You will need to use P/N: 3299 (qty: 2) to create your own harness if you wanted a connector plug that would work for the gauges.
Helpful?
Yes · 0
No · 0
Report
Keith71
· 3 years ago
I have 4 Phantom II stepper motor gauges, Speedo and Tach. What wiring harness can I use with these?
1
answer
Answer this Question
Steve from AutoMeter · 3 years ago
Unfortunately we do not sell a wiring harness kit for the phantom series gauges as the majority of those gauges come with their own wiring harnesses.
Helpful?
Yes · 0
No · 0
Report
Outlaw88
· 5 years ago
Will this plug into a 1996 Mustang 5" Tachometer?
2
answers
Answer this Question
chevyhed53 · 5 years ago
Sorry, but I can't help with this. I used this harness to hook up a 5-gauge setup with a 3 1/8" tach on a Chevy truck. I would think you'd get a quick answer on one of the Ford forums, as this would be an easy one for the blue oval crowd. Of course, if you're going to be rewiring your gauges (at least your tach), you're going to see what type of connector you have on the back of the unit, and you can match it with the right harness.
Helpful?
Yes · 0
No · 0
Report
terry crisman
· 5 years ago
is this wire 18 or 20 gauge ? terry
2
answers
Answer this Question
Bigblue · 5 years ago
If I had to guess I'd say 20.
Helpful?
Yes · 0
No · 0
Report
Boomboom
· 5 years ago
How long are the wires are they long enough that I won't have any splices
3
answers
Answer this Question
Bigblue · 5 years ago
Depends on where your mounting the gauges at and how you've got the wires ran. For the most part they reached to the top of my a-pillar.
Helpful?
Yes · 0
No · 0
Report
Joe1015
· 6 years ago
Are these made in USA?
3
answers
Answer this Question
oldpartsguy · 6 years ago
All indications show produce mad in USA. No labels on wiring or instruction to say made in China. This wiring kit is a big help and timesaver with installing a dash cluster!
Helpful?
Yes · 0
No · 0
Report
1–10 of 20 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
RPM SIGNAL ADAPTER FOR LS ENGINES, INCL. PLUG & PLAY HARNESS
Product #9123
$182.83
GAUGE INSTALL KIT FOR LS ENGINES, INCL. FITTINGS, SHORT TEMP SENSOR, MANUAL
Product #5284
$44.99