Autometer Autogage 3-3/4in White 8000 RPM Pedestal Mount Tachometer

Product 2304 DESCRIPTION:
Getting great performance or saving money doesn’t have to be choice. Engineered by AutoMeter in Sycamore, IL, The Auto Gage line of instruments provide the best bang for the buck performance in the industry. For a fast street car or a weekend racer, Auto Gage provides levels of accuracy and durability unheard of in the price category. With countless wins in magazine comparison tests, the best value in gauges comes from exactly the place you’d expect it to. AutoMeter.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Compatible with most 4, 6, and 8 cylinder engines (2 - 4 pulse per revolution ignition signals) with points, electronic, and most 12V high-performance racing ignitions.
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
Ships With
3209
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Review 1
Votes 8
★★★★★
★★★★★
1 out of 5 stars.
Poor Quality cheap plastic junk
I bought this tachometer from Summit Racing, First impressions very cheaply made. So I decided to hook the tach up an just as I thought it didn’t work correctly. The needle jumps up and down. Turn lights on and it jumps also. Manufacturers of products like this don’t care about the people that buy these products they just want your money. When person has to work every day they don’t need to be fighting this type junk on your days off.)
Recommends this product ✘ No
Helpful?
Yes · 8
No · 4
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
1 out of 5 stars. Read reviews for 3-3/4" PEDESTAL TACHOMETER, 0-8,000 RPM, WHITE/CHROME, AUTO GAGE
1.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
18
Questions
16
Answers
Questions
Ask a question
1–10 of 18 Questions
Sort by:
▼
Menu
Darryl
· a year ago
Hello, Is this Tachometer compatible with a MSD 6AL-2, PN6421 ignition system? Thanks Darryl
1
answer
Answer this Question
Alex at AutoMeter · a year ago
Thank you for your question. This tach is compatible with a MSD 6AL box. You need to make sure you are getting your tach signal from the tach terminal on the ignition box though. If you connect directly to the coil with this ignition system you could damage the tach.
Please see instructions Figure B for more information. https://www.autometer.com/pub/media/manual/2650-468X.pdf
Helpful?
Yes · 1
No · 0
Report
Joei
· 2 years ago
Hi can I use this tach with my msd streetfire 5520 box? Tach out put wire for this box is 12v square wave. Thank you Joey
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
This will work with that box.
Helpful?
Yes · 1
No · 0
Report
dsieve
· 3 years ago
I wired my new Autometer 2304 tach but it doesn't work. wired to hot wire, light, neg. post on coil, and grounded on the dash. It's on 1962 Ford with 406" motor. Help!
1
answer
Answer this Question
Jim from AutoMeter · 3 years ago
Check your coil closely. It is not uncommon with vehicles as old as yours for the coil to have been wired into the vehicle backwards at some point. The engine will still start and run. Coil negative should be connected to the distributor, coil positive to the ballast resistor on a vehicle of this age. This will result in no damage to the tach, but it will not read.
Helpful?
Yes · 1
No · 0
Report
Al Brister
· 3 years ago
I am interested to see if this tach can be mounted under the dash (like a knee knocker). Does the mounting hardware allow the tach to be rotated 108 degrees? I need to mount below dash instead of on top.
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for your question.Yes, you can rotate 180 degrees. There is al limitation that prevents 360 degrees. This is detailed in the instructions; https://www.autometer.com/pub/media/manual/2650-468X.pdf
Helpful?
Yes · 1
No · 0
Report
Golfman
· 5 years ago
What are the physical dimensions depth?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
See all dimensions for this unit here:
https://www.autometer.com/media/dimensions2014.pdf
Helpful?
Yes · 0
No · 0
Report
Rock w
· 5 years ago
Hello will this tach work for 66 v8 Chevy motor
1
answer
Answer this Question
Alex at AutoMeter · 5 years ago
Thank you for your question. This tach will work fine with a '66 Chevy engine as long as it is using a standard ignition system.
Helpful?
Yes · 0
No · 0
Report
Karl23
· 6 years ago
can the 2304 cup be mounted upside down. With the face rotated 180 degrees?
2
answers
Answer this Question
KNOH · 6 years ago
I believe the tachometer can be rotated 180 degrees, but I didn’t mount it that way, so can’t confirm
Helpful?
Yes · 0
No · 1
Report
Eric B
· 6 years ago
Can a shift light be attached to this
1
answer
Answer this Question
Jim from AutoMeter · 6 years ago
Thank you for your inquiry. The 2304 is not designed to control a shift light. You may want to consider the 2302 or 2309, both of which include shift lights.
Helpful?
Yes · 0
No · 0
Report
KSquare 620
· 6 years ago
How do I wire the 2304 tach with a MSD 6 ignition? Do I need the tach adapter?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Your MSD box should have a tach output which you would wire your green wire from the tach to.
Helpful?
Yes · 0
No · 0
Report
troy732
· 6 years ago
can I mount this tach on the side of my steering column and then rotate it so the tach is level again? Thanks Troy
1
answer
Answer this Question
KNOH · 6 years ago
Yes, there’s a screw that runs though the back housing, loosen it and rotate the gage face whichever direction you want.
Helpful?
Yes · 0
No · 0
Report
1–10 of 18 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like: