Autometer Z-Series 52mm 0-1600 Def F Full Sweep Electronic Pyrometer Gauge

Product 2654 DESCRIPTION:
Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display makes viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
The included Type K thermocouple assures maximum accuracy and minimum response time
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
Gauge kit includes Type-K Thermocouple, wiring harness, various methods for thermocouple installation, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Ships With
Wire Harness: 5297
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, Z-SERIES
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
8
Questions
8
Answers
Questions
Ask a question
1–8 of 8 Questions
Sort by:
▼
Menu
David65
· a year ago
Hi, I want to install this on my 3.3L Inline-6 Turbo Diesel I just have two questions. One: How long is the probe? Two: Is the probe threaded?
1
answer
Answer this Question
Alex at AutoMeter · a year ago
Thank you for your question. This probe measures approximately 2.5 inches from the tip of the probe to the top of the compression nut. A picture of the probe can be found at: https://www.autometer.com/street-series-probe-kit.html
Helpful?
Yes · 0
No · 0
Report
Blue Cobra
· 4 years ago
I have a Z series pyrometer in my 96 350 w/7.3 and it stays on 1 and does not move could the guage be bad or the thermocouple also my trans temp guage quit working about the same time ,could it be the sending unit or both !!
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Please send the Pyrometer to us for evaluation. For the trans temp gauge, please give our tech line a call at 866-248-6356 to assist you further with this.
Helpful?
Yes · 0
No · 1
Report
Adam S
· 5 years ago
I'm trying to install this on a rear engine vehicle. The lead is not long enough. Do you sell additional leads that are able to avoid the thermocouple issue of extending the lead? Thank you
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi Adam,
You will need this 5257 Extension Harness Kit:
https://www.autometer.com/module-wiring-extension-for-stepper-motor-incandescent-pyrometer-gauges.html
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
MKIV Tuner
· 5 years ago
I recently purchased a used pyrometer, 2654, and it came with nothing. I have a K-type probe, it doesn't have terminals on the ends. Can I just add ring terminals to it to connect the probe to the gauge?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. Type K thermocouple wire is unique, and standard crimping will result in an inaccurate gauge. Please call our Tech Support Team for assistance at 866-248-6357.
Helpful?
Yes · 0
No · 0
Report
gdg11
· 5 years ago
is there a way to buy just the gauge i have a probe kit already and need only the gauge
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. Unfortunately, we do not sell the gauge head by itself. If you have one that is not working, you can certainly send it in to us for service. Here is a form for doing so: https://www.autometer.com/media/Service_Form.pdf
Helpful?
Yes · 1
No · 0
Report
Scotts97PSD
· 5 years ago
I have this gauge in my 1997 PSD 7.3, I installed it in 2004 #AM-2654Z, I have a draw on my batteries and when I disconnected the probe wire the draw stopped. Gauge or prob? Key off and still a draw but never had a problem before?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. I would recommend reaching out to our support team so they can go through some troubleshooting with you to diagnose the cause of your issue. You can contact them at 866.248.6357 or https://www.autometer.com/contacts
Helpful?
Yes · 0
No · 0
Report
Vetts
· 6 years ago
I have this EGT gauge (# 2654) in my truck. Lately the needle seems to be all over the place. I've check the resistance on the probe and I think that's the issue (very low resistance- 1.8ohm at ambient temp). What is the replacement probe for this?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. The replacement kit would be a part #5249 which comes with the probe and wiring. If you need only the replacement probe, the correct part number is #P12709.
Helpful?
Yes · 0
No · 1
Report
Jacob
· 7 years ago
I'm wanting to buy a 1600 degree pyrometer, 0-60 psi boost gauge, and a 0-100 psi fuel pressure gauge. Do these gauges come with the necessary equipment to have the gauges give me a reading? Or do I need to purchase more equipment?
1
answer
Answer this Question
Joseph From AutoMeter · 7 years ago
Hi Jacob, thank you so much for contacting us. For a typical installation, everything you'll need would be included with those three gauges. Sometimes certain vehicles can require different adapters, but by and large, I wouldn't expect any significant additional components to be necessary. If you'd like advice on your specific vehicle, please feel free to give us a ring at 866.248.6356, hit the Chat link at the top of the page or email us here:
http://www.autometer.com/resources/index/ask_a_question
Hope this helps!
Helpful?
Yes · 1
No · 1
Report
Ask a question
You may also like:
MODULE, WIRING EXTENSION, FOR STEPPER MOTOR INCANDESCENT PYROMETER GAUGES
Product #5257
$97.49
FITTING, WELD CONNECTOR, 1/8" NPT FEMALE
Product #2260
$14.57
LED BULB, REPLACEMENT, T3 WEDGE, BLUE
Product #3286
$15.46
LED BULB, REPLACEMENT, T3 WEDGE, WHITE
Product #3288
$13.72
LED BULB, REPLACEMENT, T3 WEDGE, GREEN
Product #3285
$17.99
LED BULB, REPLACEMENT, T3 WEDGE, RED
Product #3284
$14.99