Autometer Sport-Comp 3-3/8 inch 190 KPH Electronic Speedometer Gauge

$515.25 CAD

AutoMeter SKU: atm3987-M

<p>Earn [points_amount] when you buy this item.</p>

Product 3987-M DESCRIPTION:
AutoMeter’s Electronic Programmable Speedometer provides an easy-to-install and easy-to-calibrate solution that will help keep your speed exactly where it needs to be. These accurate and responsive speedometers are compatible with most factory and aftermarket speed senders, and you’ll wonder why you ever struggled with a speedometer before. Calibration is as simple as a two mile drive, or for even easier operation, AutoMeter’s GPS Speedometer Sender is a simple solution for any AutoMeter Programmable Speedometer.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
Compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Simple push button, 2 mile drive calibration. No dip switches!
Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination.
Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Ships With
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 3-3/8" SPEEDOMETER, 0-190 KM/H, ELECTRIC, SPORT-COMP
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
4
Questions
4
Answers
Questions
Ask a question
1–4 of 4 Questions
Sort by:

Menu
eric 1964
· 3 years ago
Can the bezel, pointer and led light be changed ? I was looking at the 4487M with a chrome bezel, anodized pointer and blue LED but would really prefer if the background dial was black rather than white
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for your question. This can be done on Custom Shop, but unfortunately the site is currently down.
Helpful?
Yes · 0
No · 0
Report
Jimbobb
· 6 years ago
Hi wondering if the odometer is programmable to match a factory speedo it would be replacing? Thanks
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Yes, after we have received payment for the tach, you can either send it to us or request a certain mileage upon purchasing the tach and we can set the odometer for you. Only we can do this at the factory and miles cannot be taken off an odometer for legal reasons.
Helpful?
Yes · 0
No · 0
Report
Wheels
· 7 years ago
I have one of these fitted in my 1975 Mazda Rx4 (929) I have fitted it as per the manual instructions but I am finding that the Speedo is dropping you off every now and then sometimes for 5 to 10 seconds sometimes for a minute what would this be due to?
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi there, thank you for connecting with us. This will likely require some additional dialogue and troubleshooting with our Technical Support Team. I would recommend sending us an email with a detailed explanation of the problem you're experiencing and the type of sender you're using. Here is the link to email us.
http://www.autometer.com/resources/index/ask_a_question
Helpful?
Yes · 0
No · 0
Report
Luke w
· 7 years ago
Hi guys im just wondering about changing the bulb on one of these speedo's , im looking at going to LED buld and cant see much on bulb location or if it can even be swapped out, any help would be greatly appreciated cheers
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Luke, thank you so much for contacting us. The bulb can be accessed directly from the back of the gauge. Depending on when it was manufactured, there will either be a black cover on the top middle of the back side or a directly wired socket in the same location. It should be extremely obvious as soon as you see the back of the gauge. The bulb is a 194 style wedge base. We offer some LEDs which you can see here:
https://www.autometer.com/catalogsearch/result/?q=led+t3+#1&profile=products
Hope this helps!
Helpful?
Yes · 1
No · 0
Report
Ask a question
You may also like:
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.