Autometer Phantom 3-3/8in 160 MPH In-Dash Electric Programmable Speedometer

Product 5888 DESCRIPTION:
AutoMeter’s Electronic Programmable Speedometer provides an easy-to-install and easy-to-calibrate solution that will help keep your speed exactly where it needs to be. These accurate and responsive speedometers are compatible with most factory and aftermarket speed senders, and you’ll wonder why you ever struggled with a speedometer before. Calibration is as simple as a two mile drive, or for even easier operation, AutoMeter’s GPS Speedometer Sender is a simple solution for any AutoMeter Programmable Speedometer.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
Compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Simple push button, 2 mile drive calibration. No dip switches!
Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination.
Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Ships With
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 3-3/8" SPEEDOMETER, 0-160 MPH, ELECTRIC, PHANTOM
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
12
Questions
10
Answers
Questions
Ask a question
1–10 of 12 Questions
Sort by:
▼
Menu
jerose
· 3 years ago
Hi, Is this speedometer suitable for 1995 GMC YUKON transmission????
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
If you would like, send us an email with more information on your vehicle and one of our techs would be able to give more insight.
Helpful?
Yes · 0
No · 0
Report
Anonymous · 4 years ago
i have a 1977 f250 4x4 high boy divorced transfercase will the speedo sensor 5291 work on this application?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Hello! A 1977 Ford is very likely a plug in style speedometer cable, which would actually use our 5292 sender.
Helpful?
Yes · 0
No · 0
Report
Chief352
· 5 years ago
I have a ford AOD transmission that did not come with a speedometer cable gear. What teeth count should I use when selecting a gear (17, 18, 20) or does it matter
2
answers
Answer this Question
Jim from AutoMeter · 5 years ago
Hi Chief352,
Our electric speedometers can be calibrated regardless of gear ratio. That said, the faster the sender spins, the smoother the operation of the speedometer. So in that regard, we would select the smallest gear, 17 tooth.
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
Jon77
· 5 years ago
Can you hook this up to a GPS unit so you don't have to calibrate it off the transmission
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. This speedometer will work with our 5289 GPS Interface:
https://www.autometer.com/universal-gps-speedometer-interface-module.html
Helpful?
Yes · 0
No · 0
Report
Edub of Oregon
· 6 years ago
Will this speedo work correctly with the VSS output on a 4L65E transmission? 5.3L LS conversion on a 1972 C10. Painless EFI harness with VSS output.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. It certainly should. Our speedometer is compatible with just about every VSS, all you will need to do is go through the calibration process for it to work accurately with your application.
Helpful?
Yes · 0
No · 0
Report
bobs427
· 6 years ago
Does this speedometer have gps built in or do i have to buy the gps attachment. I run all phantom gauges in my vehicle.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. This is one of our Electric Speedometers, not one of our GPS speedometers. You can use this with our GPS module #5289 and that will make this function as a GPS speedometer. I would recommend getting our Phantom GPS speedometer #5880. It is 3-3/8" like this one, however, it only goes to 140mph not 160mph. The #5880 does come programmed and equipped for GPS and includes the antenna.
Helpful?
Yes · 0
No · 0
Report
Billiam
· 7 years ago
Is it programmable and if it is how
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Thank you for reaching out to us. Yes, our electronic speedometers are programmable and can be re-programmed at any time after a gearing or tire size change. You can find the detailed instructions on calibrating in the instruction link below, but it's as simple as pushing a button, driving a predetermined 2 mile distance, then pushing the button again.
https://www.autometer.com/media/manual/2650-1164.pdf
Helpful?
Yes · 1
No · 1
Report
joe r
· 7 years ago
Can this guage be programed to start with 134000 miles ?
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Joe, thank you so much for contacting us. We can either program mileage onto an existing speedometer for you or do a special build on a new one with miles added. It's important to note while we can add mileage, the firmware in them does not allow mileage to be taken away. To add miles to an existing unit, send it to our service team using this form:
http://www.autometer.com/media/Service_Form.pdf
If you'd like to order one with mileage already built in, please give us a call at 866.248.6356 and we can help to facilitate that. Hope this helps!
Helpful?
Yes · 1
No · 0
Report
Chevota77
· 7 years ago
Wanting to upgrade my mechanical to this electric on my '77 Landcruiser Fj40. I found a part that connects to my transfer case speedo output to a 5/8 - 18 male fitting for a speed sensor. What can you recommend? Not wanting the GPS option.
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. Unfortunately our thread on style speed sender uses a 7/8"-18 thread. We do not presently have a direct adapter for your transfer case. You could use something like this driveshaft speed sender, though GPS is the best option:
https://www.autometer.com/universal-electronic-speed-sensor.html
Sorry for the bad news, I hope this helps.
Helpful?
Yes · 0
No · 0
Report
six pack
· 4 years ago
do you have instructions to calibrate your elec speedometer i bought. I have the 3 3\8 0 to 160. Phantom . thank you
0
answers
Answer this Question
1–10 of 12 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15