Product 6013 DESCRIPTION:
AutoMeter's preconfigured race dash displays can be installed on any application from the sportsman racer to the top tier motorsports team. In addition to all of the display perameters, the race dash display records your run and plays it back right on the dash.
AutoMeter recommends contacting our tech agents at (866)248-6357 prior to purchase for any questions or concerns regarding this product, installation, use, or accessories related to this product.
The AutoMeter Race display systems are designed specifically for the harshest environments. The carbon composite housing is IP67 sealed against water and dust intrusion and will easily withstand 20g of continuous vibration and 50g of shock. The analog pointer provides a quick and clear display for engine RPM while the digital display layout is configurable using preconfigured sensor inputs using multiple pages for your axillary instrumentation needs. User definable warnings display across the digital display and illuminate the warning LED placed to the side of the tachometer to alert the driver to critical information. Record and play back your run right on the face of the dash display.
Display Features:
Dimensions - 8.3" Wide x 5.2-1/16" High x 1.4" Deep
Carbon Composite Housing
Single 19 pin MIL spec connector and motorsports wiring loom utilizing Mini Sure Seal connections for ease of installation and removal
Includes oil pressure, water temperature, oil temperature , and fuel pressure sensors
Display features digital values for vehicle parameters and configurable text warning messages
Built-in warning and shift light LEDs
Optional shift light output, single stage or progressive shift light
Inputs:
Configurable Tachometer for 1 to 12 cylinders
Vehicle speed
Oil pressure
Water temperature
Oil temperature
Fuel pressure
Internal battery voltage
Environmental:
IP67 sealed
Operating temperature range: 20ºF to 180ºF
Humidity: 0-100% RH
Continuous vibration up to 20g, Shock up to 50g
Miscellaneous:
Weight: 1.5lbs
Motorsports grade wiring harness included
Upgrade:
Data download upgrade with ST8185 - Allows the Race dash to download to DataPro software. Includes network harness, network to USB cable, and DataPro software
Feature Points
Monitors and displays: RPM, Speed, Oil Pressure, Oil Temperature, Water Temperature, Voltage, & Fuel Pressure.
Dimensions - 8.3" Wide x 5.2-1/16" High x 1.4" Deep
Single 19 pin MIL spec connector and motorsports wiring loom utilizing Mini Sure Seal connections for ease of installation and removal
Includes oil pressure, water temperature, oil temperature , and fuel pressure sensors
Display features digital values for vehicle parameters and configurable text warning messages
Built-in warning and shift light LEDs
Optional shift light output, single stage or progressive shift light
Configurable for engines from 1-12 cylinders
Programmable Speed input
IP67 sealed
Ships With
Includes Sending Unit: 2x ST764 Temperature Sensor, 2x ST747-1/8NPTF Pressure Sensor, ST492 Pulse Amplifier
Call AutoMeter Technical Support At 1-866-248-6357
Wire Harness: ST872-006 Wire Harness
Hardware Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for RACE DASH, 0-3-10.5K RPM, PRO-COMP PRO
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
10
Questions
10
Answers
Questions
Ask a question
1–10 of 10 Questions
Sort by:
▼
Menu
Crager5
· 2 years ago
Is the background color configurable or is it always green? Is the size of the numbers and letters configurable?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
The size of the numbers and letters are not configurable and unfortunately neither is the dash for the green color.
Helpful?
Yes · 0
No · 0
Report
trace
· 2 years ago
Hello I'm just inquiring to see if you'd ship to Brisbane Australia thank you regards
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
Please contact Rocket Industries in Sydney for Auto Meter Products distribution in Australia.
Helpful?
Yes · 0
No · 0
Report
Allen ward
· 3 years ago
How to change fuel pressure from BAR TO PSI ON A 6014 dash. Is there a wheel speed function on the 6014.
1
answer
Answer this Question
Alex at AutoMeter · 3 years ago
There is no way to change the metric values and it does not have a speed sensor. The wheel speed sensor is available on the 6013.
Helpful?
Yes · 0
No · 0
Report
jwkopec
· 3 years ago
What is the ACTUAL overall size? Quick spec says 7.5"x4", description says 8.3"x5.2"???? I would like to use it in a F5000 customer car and do not have a lot of empty space in the dash. The installation instructions are of little help.
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
https://www.autometer.com/pub/media/manual/2650-1474.pdf Go on page 28 and it will show a more detailed version of the dimensions.
Helpful?
Yes · 0
No · 0
Report
Mike409
· 3 years ago
where address do i send auto meter race dash to have memory battery replaced
1
answer
Answer this Question
Matt from AutoMeter · 3 years ago
While this form isn't required, this will include instructions on sending the dash in for service https://www.autometer.com/media/Service_Form.pdf
Helpful?
Yes · 0
No · 0
Report
Dave3540
· 3 years ago
Hello, run a supercharged Top Dragster using MSD pro mag 20, currently use a standard Autometer tach set up, do I need anything special on the interface to hook this unit up? thanks, Dave Jamison
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
You would not. The race dash comes with everything that you need as long as you have a standard tach signal. I would recommend reaching out to MSD to confirm that, but in any case, our 9118 will work.
Helpful?
Yes · 0
No · 0
Report
Joe469
· 5 years ago
What is the small thread size for the water temp sensor?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. The thread size for our water temp sensor is 1/8" NPT.
Helpful?
Yes · 0
No · 0
Report
Juffy
· 6 years ago
Could any of these be used for Marine application like outboard motors
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Hi Juffy, thank you for the question. Yes, our Race Dashes would be suitable for most marine applications. For additional questions and details for your specific application, we'd recommend reaching our to our Technical Sales Team at 866-248-6357. You can also email us here:
https://www.autometer.com/contacts
Helpful?
Yes · 0
No · 0
Report
LAURO ENRIQUE VAZQUEZ
· 7 years ago
Joseph, thanks for the reply. Can you recommend an experienced or specialized dealer in the Race Dash? So I can provide the best support for my customers.
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Lauro. This would probably be a conversation best held via email. There's a lot of variables, depending on your location, the type of racing you're doing and what you're looking to accomplish with a dash system (just display, data acquisition, track mapping, etc). You can contact us directly via this link and we can help to find the best point of contact to help you:
https://www.autometer.com/resources/index/ask_a_question
Thank you!
Helpful?
Yes · 0
No · 0
Report
LAURO ENRIQUE VAZQUEZ
· 7 years ago
Hello I have 2 customer cars: Renault Clio II RS Group N and a BMW2002 Tii With E30 M3 S14 engine and electronics. What is required for these cars to use your Race Dash?
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Lauro, thank you so much for contacting us. Provided the vehicles have either a 12v or 16v electrical system and an engine, this dash kit will work. You may very well need to use some metric thread adapters to install the sending units in the engine, but beyond that, installation should be very straightforward. Hope this helps!
Helpful?
Yes · 1
No · 0
Report
Ask a question
You may also like:
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
5 Stage Sequential Shift Light Module
Product #ST539
$363.96
Panel Mount Shift Light RED
Product #ST537
$60.97
Also Purchased With
STREET DASH, 0-3-10.5K RPM, PRO-COMP PRO
Product #6003
$1,755.64
RACE DASH, 0-8K RPM, PRO-COMP PRO
Product #6011
$1,939.50
RACE DASH, 0-3-8K RPM, PRO-COMP PRO
Product #6012
$1,939.50
LCD Competition Dash
Product #6021
$3,042.24
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor