Autometer 87-93 Ford Mustang Fox Body Digital Instrument Display Color LCD

Product 7007 DESCRIPTION:
The InVision direct-fit digital dash system for 1987-1993 Ford Mustang Fox Body is a one model solution for your entire dash. Monitor the speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in one place. Upgrade your dash with the latest, modern LCD offering from AutoMeter.
Feature Points
Direct-fit instrumentation solution for 1987-1993 Ford Fox Body Mustangs that monitors speedometer, tachometer, water temperature, oil pressure, fuel level, and volts all in a high resolution and colorful display
12.3” LCD display with four user programmable screens
Integrated notifications for high beams and turn signals as well as instrument warnings and a user selectable warning light
Includes universal wiring harness and sending units for water temperature and oil pressure as well as a joystick for dash customization
Helps identify critical conditions with visual or audible alarms - low fuel level/oil pressure/voltage and high water temperature
Adjustable RPM range and displays in imperial or metric measurements
Requires no cutting, drilling or modification to factory pieces
Speedometer easily calibrates to OEM or aftermarket vehicle speed sensors and the tachometer is capable of calibrating to many engine types
User-selectable fuel level resistance ranges designed for OEM and aftermarket sending units
Ships With
Includes Sending Unit: 2258, 2242
3/8" NPT and 1/2" NPT adapter fittings
Brackets Included
California Residents: Prop 65 WARNING
Videos:
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Montgomery Al
Review 1
Votes 0
★★★★★
★★★★★
4 out of 5 stars.
This looks awesome!
My son and I just installed one in his 87' convertible. It looks great, and is easy to use. However, it takes fair understanding of how to read a factory wire diagram and general electrical knowledge. This panel is perfect for a restomod project. I did mis understand the description so I thought you could change the colors on all the settings. In reality that's not hard to do now that you have the gaugest built in the software. That should come out soon. It would also be nice if the user could change the boot screen from the autometer logo to something personal. Lastly, a really great upgrade would be the ability to design your own gauges in software and then upload them. Remembers people buy this to personalize and customize their car. Add these ideas in and it will increase the draw.
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
4 out of 5 stars. Read reviews for INVISION LCD DASH KIT, 87-93 FORD MUSTANG FOX BODY, DIRECT FIT DIGITAL DASH
4.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
14
Questions
14
Answers
Questions
Ask a question
1–10 of 14 Questions
Sort by:
▼
Menu
SlowVic1
· 6 days ago
Can I put this in a 2003 crown Victoria
1
answer
Answer this Question
Paul G. · 4 days ago
That dash is a replacement for a 1987-1993 ford fox body to install it in a 2003 crown Victoria it would have to be custom fitted. You might look at part #7000 for a universal fit
Helpful?
Yes · 0
No · 0
Report
Just the facts
· 8 months ago
Holley Terminator X....most people were asking if it will work with the Terminator X, will it plug directly into the terminator X is the real question, anything will work with the terminator x but your instructions are saying to rewire EVERYTHING correct?
1
answer
Answer this Question
Jim from AutoMeter · 8 months ago
This dash is not plug and play with Terminator. It will be installed as shown with the included instructions.
Helpful?
Yes · 0
No · 0
Report
Ger Stang
· a year ago
Does the unit have a built in 'slosh module' for the fuel level (so it's not erratic when fuel sloshes in the tank during autox)?
1
answer
Answer this Question
Steve from AutoMeter · a year ago
No, that would be dependent on the fuel level sending unit you ultimately end up using.
Helpful?
Yes · 0
No · 0
Report
jimberg98
· 2 years ago
Will future versions support additional sensors like fuel pressure?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
Unfortunately they will not. The unit will only support the following: Speed, Tach, Water Temp, Oil Pressure, Fuel Level, and Volts.
Helpful?
Yes · 0
No · 0
Report
jimberg98
· 2 years ago
Where can I download the installation instructions to see what's involved?.
1
answer
Answer this Question
Alex at AutoMeter · 2 years ago
The instructions for this dash can be found at: https://www.autometer.com/pub/media/manual/2650-2033-77rA.pdf
Helpful?
Yes · 0
No · 0
Report
turboman351
· 2 years ago
does this work with holley terminator x
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
Our Invision Dash will work with your Holley Terminator. The install process is available from the instruction link on the product page.
Helpful?
Yes · 0
No · 1
Report
MUSTANG1
· 2 years ago
WHAT IS THE WARRANTY?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
We have a 12 month warranty from the time of purchase.
Helpful?
Yes · 0
No · 0
Report
FL1973
· 2 years ago
Will this gauge work with a 87-93 mustang that is Coyote swapped?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
Yes, this will still work as all you need to do is provide the data the InVision dash is looking for. You will also have to use the supplied water temp and oil pressure sending units. So for this we do recommend following our writeup (https://www.autometer.com/blog/installation-guide/2015-ford-mustang-5-0-coyote-water-temp-and-oil-temp-install/) so you can get these properly installed. As for your tach you will also need to purchase P/N: 9117 in order to obtain a proper signal as well. This will be everything you will need in order to properly installed this into that application using that engine type. For any further assistance please give us a call at 866-248-6356.
Helpful?
Yes · 0
No · 0
Report
95sasquatch
· 2 years ago
Could you use a GPS Speed sensor for this setup?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
You can use P/N: 5289 if you wanted to go GPS with that unit.
Helpful?
Yes · 0
No · 0
Report
JD92FOX
· 2 years ago
does this work with the stock factory wiring or do i need to run all new sensors and wires?
1
answer
Answer this Question
Alex at AutoMeter · 2 years ago
The invision dash does not utilize the factory harness. It is recommended to run new wires and use the sending units provided with the kit.
Helpful?
Yes · 0
No · 0
Report
1–10 of 14 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
LCD Competition Dash
Product #6021
$3,042.24
Also Purchased With
TIRE PRESSURE, 0-60 PSI
Product #2160
$39.05
BATTERY EXTENDER, 12V / 1.5A
Product #BEX-1500
$55.59
JUMP STARTER, EMERGENCY BATTERY PACK, 14.8V, 800A PEAK, 1800 mAh
Product #EP-800
$80.84
INVISION LCD DASH, UNIVERSAL, PANEL MOUNT
Product #7000
$1,132.99