Autometer Jeep 52.4mm Short Sweep Electronic 100-250 Def F Transfer Case Temperature Gauge

Product 880430 DESCRIPTION:
High transfer case temps mean the difference between having 4WD and not having 4WD. Monitoring this critical parameter ensures that your cooling system is performing properly and your transfer case will continue to transfer the power to all of the drivetrain. Highly accurate and durable thanks to AutoMeter’s patented air core meter movement, a single wire, 1/8” NPT temperature sender is included. Officially licensed Jeep product.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
Gauge kit includes 1/8” NPT temperature sender, 3/8” and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Ships With
Includes Sending Unit: 2258
3/8" NPT and 1/2" NPT adapter fittings
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" TRANSFER CASE TEMPERATURE, 100-250 °F, AIR-CORE, JEEP
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
2
Questions
2
Answers
Questions
Ask a question
1–2 of 2 Questions
Sort by:
▼
Menu
malync2
· 4 months ago
Is this gauge available without the JEEP name on it?
1
answer
Answer this Question
Alex at AutoMeter · 4 months ago
Unfortunately we do not have this exact gauge without the Jeep logo on it. You could use part number 2552 which looks the same and says "Trans Temp" instead of "Transfer Case".
Helpful?
Yes · 0
No · 0
Report
kc in iowa
· 2 years ago
looking for exact instructions of where to place the temp sender in the transfer case
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
The sending unit is 1/8" NPT. Installation will require either drilling and tapping the case to adapt, or replacing the drain plug with one that can accept the sender.
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
SENSOR, TEMPERATURE, 1/8NPTF MALE, SHALLOW DEPTH, SHORT SWEEP ELEC.
Product #2259
$21.70
FITTING, WELD CONNECTOR, 1/8" NPT FEMALE
Product #2260
$14.57
FITTING, ADAPTER, TRANSMISSION LINE, 3/8" OD TUBING, 1/2" NPTF
Product #2286
$60.33
FITTING, ADAPTER, TRANSMISSION LINE, 5/16" OD TUBING, 1/2" NPTF
Product #2287
$69.66