Autometer LED Lighting Dimmer

Product 9114 DESCRIPTION:
This compact separate module is designed to allow for isolated dimming for all AutoMeter gauges utilizing LED lighting technology separate from your vehicle's OEM dash. Supports up to 6 instruments.
Feature Points
Includes 4ft. Wiring harness.
0.250 in. Control Shaft, knob not included.
Black Composite Case: Dimensions - 2.380 in. x 1.250 in. x 0.750 in. (1.375 in. from bottom of case to tip of control shaft)
Utilizes two mounting holes (0.187 in.) located 2 in. on center.
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
1–2 of 2 Reviews
?
Sort by: Most Relevant
▼
Menu
≡
Filter Reviews
Clicking on the following button will update the content below
Melbourne, AUS
Review 1
Votes 3
★★★★★
★★★★★
5 out of 5 stars.
Works as intended.
Fitted this dimmer controller as part of a stand alone circuit. Gauge lighting independent from dash lighting, with its own switch. This dimmer controller works very well with good adjustment values in that setup.
Recommends this product ✔ Yes
Helpful?
Yes · 3
No · 0
Report
Review 1
Votes 8
*
Verified Purchaser
★★★★★
★★★★★
2 out of 5 stars.
Dimming Control Module
Bought auto meter 4th gen Ram factory gauges (pyrometer, trans temp, and boost) and the dimmer module. I hooked up the dimmer module to the trucks dimmer switch and the pyrometer gauge and trans temp gauge dim when you dim the dash lights; however the boost gauge doesn’t. The boost gauge can only be dimmed by the dimmer module directly.
Recommends this product ✔ Yes
Helpful?
Yes · 8
No · 14
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
3.5 out of 5 stars. Read reviews for MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
3.5
2 Reviews
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
2
Reviews
17
Questions
26
Answers
Questions
Ask a question
1–10 of 17 Questions
Sort by:
▼
Menu
71/ZZ502
· 11 months ago
9114 Dimmer, says it is good for 6 lamps.1971 Corvette. I'm using this to illuminate, Auto Meter Ultra Lite 2, Tachometer, Speedometer, Fuel, Water temp, Clock, Oil Pressure and Volt meter. Total being 7. How do I accomplish that task?
1
answer
Answer this Question
Steve from AutoMeter · 11 months ago
The 9114 will be able to handle the seven gauges you are wanting to control. If there are further questions please reach out to our tech support at 866-248-6356.
Helpful?
Yes · 0
No · 0
Report
Captaincooper
· a year ago
What is the maximum total amps that this dimmer will handle. Question asked because it states 6 gauges, but no indication of ow many amps.
1
answer
Answer this Question
Jim from AutoMeter · a year ago
This product is designed to handle the lighting for a standard set of Auto Meter LED lit instruments, four gauges plus a speedometer and tach.
Helpful?
Yes · 0
No · 0
Report
bob r
· 2 years ago
do i need this dimmer or can i wire into wire from car dimmer switch or if i dont use this dimmer will it damage gauges
1
answer
Answer this Question
Thomas From AutoMeter · 2 years ago
This dimmer is generally used when you have a bunch of our LED gauges and you would like to have them all running on one dimmer control. You can still use the car dimmer switch on your vehicle, this item is not a necessity for LED gauges.
Helpful?
Yes · 1
No · 0
Report
CSTSDSGS
· 4 years ago
Looking to setup 9 gauges and looking for a proper dimmer module for the LED gauges. Can this handle 9 of your gauges or is there a different module for this many gauges?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. This is designed to be used with 6 gauges. Please contact our tech support for more info and assistance on this at 866-248-6356.
Helpful?
Yes · 0
No · 1
Report
stuntman
· 5 years ago
will this work with the elite series guages? On the website it states nothing specific to the different gauges. however on the package details it states that its for C2 and EV series gauges. No other gauges are stated. please clarify.
1
answer
Answer this Question
Arlen · 5 years ago
If the elite series has led backlighting your good to go. This dimmer is designed to work with led's
Helpful?
Yes · 0
No · 0
Report
Youngblood
· 5 years ago
I have the dimmer hooked up to a shift indicator white wire. When on bright and I start to dim it goes black then as I turn it goes to very dim on up to a little less than full bright. Is this how it should work?
3
answers
Answer this Question
Steve51 · 5 years ago
Cut this piece of junk dimmer switch out of your system and throw it away. Mine never worked and I bought two of them before I realized how screwed up they are. Ask yourself this question, how come Autometer does not have tech support available to answer these wiring questions or at least give you guidance. Instead, they pawn this off on past customers to diagnose this problem. You're about the 5th guy to ask me to help with this dimmer. Honest to god, just throw it away!
Helpful?
Yes · 2
No · 0
Report
Will53
· 5 years ago
Can this gauge dimmer switch be use on a aftermarket tachometer with 3 gauges?
2
answers
Answer this Question
Arlen · 5 years ago
Yes, I have mine hooked to a Autometer tach and 3 Autometer gauges. Keep in mind that this dimmer is designed for led gauges.
Helpful?
Yes · 0
No · 0
Report
wacker
· 5 years ago
Will this dimmer control work on VDO marine gauges?
2
answers
Answer this Question
1924 T-Bucket · 5 years ago
Yes, it will work on any gauges. Just be sure that you are only powering the gauge lamps.
Helpful?
Yes · 0
No · 0
Report
John B
· 5 years ago
I have this hooked up to 3 AM gauges as per instruction on a 1996 Mustang, white to white from gauges, purple wire to the light switch blue with red stripe wire, black to body ground, it's not dimming, gauges do dim with cars dimmer only. HELP!
2
answers
Answer this Question
Arlen · 5 years ago
You may just have a bad dimmer switch, everything you wrote seems correct. Call autometer tech support they are very helpful
Helpful?
Yes · 0
No · 0
Report
Ron67
· 6 years ago
I have 2 sport comp 2 gauges part numbers 3604 and 3670, will this switch dim both of them together
3
answers
Answer this Question
styles · 6 years ago
yes
Helpful?
Yes · 0
No · 0
Report
1–10 of 17 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
GAUGE WIRE HARNESS, UNIVERSAL, FOR TACH/SPEEDO/ELEC. GAUGES, INCL. LED INDICATORS
Product #2198
$166.21
SSE Gauge Connector, 2 Pack
Product #3298
$17.74
CONNECTOR, WIRING, 8 TERMINAL, FOR ELEC. IN-DASH TACH OR SPEEDOMETER
Product #3299
$18.40