Autometer Display Controller DashControl Chevrolet Cruze 2011-2015

Product DL1030U DESCRIPTION:
AutoMeter’s remarkable DashControl™ utilizes your vehicle’s factory display(s) to provide performance information without modification. Available for certain vehicles with a Driver Information Center (DIC), DashControl™ plugs into the OBDII port and “hijacks” these displays, allowing you to monitor parameters from the vehicle’s data bus. Customize the display pages to display what you want, where you want it. Because there is no modification to any of the vehicle’s computer systems, it’s 100% warranty friendly and reversible simply by unplugging the device. It’s the easiest, most integrated solution for gauges yet, and takes only seconds to install.
DashControl™ offers customizable alerts as well. Water temp getting too hot or oil pressure dropping? DashControl™ can activate your factory warning chime and display an alert in the DIC at any value you set. Customization is incredibly easy using our intuitive configuration software. Better still, the system is expandable to add up to two additional analog inputs for parameters not monitored by your vehicle’s computer systems.
Download the DashControl Software HERE
Applications:
‘08-'15 Chevy Cruze - Gas Only
Displays:
DIC, Radio
Supported PIDs:
Engine Load (%)
Engine Coolant Temperature (ºF, ºC)
Short Term Fuel Trip Bank 1 (%)
Long Term Fuel Trip Bank 1 (%)
Short Term Fuel Trip Bank 2 (%)
Long Term Fuel Trip Bank 2 (%)
Manifold Absolute Pressure (PSI, kPa)
Engine RPM
Vehicle Speed (MPH, KPH)
Spark Timing (Deg.)
Intake Air Temperature (ºF, ºC)
Air Flow (g/s, lb/min)
Throttle Position (%)
Oxygen Sensor Voltage Bank 1 Sensor 1 (mV)
Oxygen Sensor Voltage Bank 1 Sensor 2 (mV)
Oxygen Sensor Voltage Bank 2 Sensor 1 (mV)
Oxygen Sensor Voltage Bank 2 Sensor 2 (mV)
Fuel Level (%)
Barometric Pressure (inHg, kPa)
Loop Status (0=Off, 1=Open Loop, 2=Closed Loop, 4=OL-Drive, 8=OL-Fault, 16=CL-Fault)
Fuel Alcohol Content (%) [Custom Tune PID]
Commanded Evap Purge (%)
Commanded Lambda
Ambient Air Temperature (ºF, ºC)
Knock Retard (Deg.)
Engine Oil Pressure (PSI, kPa)
Engine Oil Temperature (ºF, ºC)
Engine Oil Life Remaining (%)
Total Misfires
Injector Pulse Width Bank 1 (ms)
Injector Pulse Width Bank 1 (ms)
CMP Sensor RPM
CKP Sensor RPM
Delivered Torque Percent (%)
Torque Delivered (Ft/lb, Nm)
Fuel Trim Cel
Torque Management Spark Retard (Deg.)
Power Enrichment (0=Inactive, 1=Active)
Commanded Cooling Fan (%)
MAF Frequency (Hz)
Current Gear (Automatic Transmission Only)
Calculated Current Gear
Electronic Throttle Indicated Pedal Position (%)
Electronic Throttle Indicated Throttle Position (%)
Output Shaft Speed (RPM)
Transmission Fluid Temperature (ºF, ºC)
Right Front Position Sensor Voltage (V)
Left Front Position Sensor Voltage (V)\
Right Rear Position Sensor Voltage (V)
Left Rear Position Sensor Voltage (V)
Left Front Strut/Damper Damping Level (%)
Right Front Strut/Damper Damping Level (%)
Left Rear Strut/Damper Damping Level (%)
Right Rear Strut/Damper Damping Level (%)
Average Vehicle Speed (MPH, KPH)
Fuel Range (Mi, Km)
Average Fuel Economy (MPG, L/100km)
Instant Fuel Economy (MPG, L/100km)
Odometer (Mi, Km)
Trip Odometer A (Mi, Km)
Trip Odometer B (Mi, Km)
Washer Fluid Level Switch (0=Off, 1=On - fluid low)
Left Front Wheel Speed (MPH, KPH)
Right Front Wheel Speed (MPH, KPH)
Left Rear Wheel Speed (MPH, KPH)
Right Rear Wheel Speed (MPH, KPH)
Rough Road Detected (g)
Lateral Accelerometer Sensor Voltage (V)
Lateral Acceleration (g)
Yaw Rate Sensor Voltage (V)
Yaw Rate (Deg./S)
Steering Wheel Angle (Deg.)
Brakes On (0=Off, 1=On)
Left Front Tire Pressure (PSI, kPa)
Right Front Tire Pressure (PSI, kPa)
Left Rear Tire Pressure (PSI, kPa)
Right Rear Tire Pressure (PSI, kPa)
Calculated Boost (PSI, kPa)
Calculated Fuel Flow Rate (g/h, l/h)
Instantaneous Estimated Engine Power (HP, lb/ft)
Distance With AFM Active – Running Total This Trip (Mi, Km)
60ft Time (Sec)
330ft Time (Sec)
0-60 MPH (Sec)
0-100 KPH (Sec)
60-130 MPH (Sec)
100-200 KPH (Sec)
1/8 Mile Time (Sec)
1/8 Mile Elapsed Distance (Mi)
1/8 Mile Trap Speed (MPH)
1/4 Mile Time (Sec)
1/4 Mile Elapsed Distance (Mi)
1/4 Mile Trap Speed (MPH)
1/2 Mile Time (Sec)
1/2 Mile Elapsed Distance (Mi)
1/2 Mile Trap Speed (MPH)
1 Mile Time (Sec)
1 Mile Elapsed Distance (Mi)
1 Mile Trap Speed (MPH)
Feature Points
Take control of your vehicle instruments to unlock hidden performance info!
Display missing data your vehicle computer already knows - AFR, boost, temps, pressures, HP/TQ and more!
Your data, the way you want to see it - fully customize layouts with free DashControl software!
Improve on factory performance alerts by programming on screen text messages for alarm points and combine with a trigger to activate the vehicle's audible chimes for a fine tuned display that's specific to your driver displays.
Add up to two additional analog sensor inputs for those couple additional engine parameters you may want to see that are not readily available on the factory CANbus network.
Great alternative to add-on instruments and displays, that won't affect the vehicle's interior appearance (or attract thieves) while keeping the driver's line of sight clear and dash space open. Ideal for 'sleeper' projects and track days!
100% warranty friendly - Completely reversible by simply unplugging the module from the vehicle.
Supported Display Control: DIC, RADIO
Ships With
California Residents: Prop 65 WARNING
Videos:
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for DASHCONTROL OBDII DISPLAY CONTROLLER, CHEVROLET CRUZE, GAS 2011-2015
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
7
Questions
7
Answers
Questions
Ask a question
1–7 of 7 Questions
Sort by:
▼
Menu
Flapflaps22
· 5 months ago
I have a 1st generation 2016 Cruze limited, will this work on it ?
1
answer
Answer this Question
Jim from AutoMeter · 5 months ago
This will not work with a 2016 model.
Helpful?
Yes · 0
No · 0
Report
Nathaniel
· 4 years ago
Will it work on a 2015 Buick encore?
1
answer
Answer this Question
xr4ti · 4 years ago
The encore and Cruze run off the same computer and systems, but not %100 sure about it.
Helpful?
Yes · 0
No · 0
Report
Anonymous · 5 years ago
Can u turn up ur boost with this
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. No, this can only display data, it cannot modify any settings.
Helpful?
Yes · 0
No · 0
Report
kd0ddu
· 6 years ago
Will this work with the 2014 diesel model?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Unfortunately, no this will not work with the diesel model.
Helpful?
Yes · 0
No · 0
Report
Gcbader
· 6 years ago
if I got 7"inch Navigation Display Screen do I need the buttons from the stock cruze radio
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
If this is any type of aftermarket display, DashControl will likely not display. We can only offer support for the original equipment that we've developed and tested on. Once everything is set-up, you can cycle through multiple engine parameters, but that is done via the power lock/unlock switch.
Helpful?
Yes · 0
No · 0
Report
Gcbader
· 6 years ago
What can I put in the place of my display screen in a 2011 Chevy cruze. I have a after market radio. Have the display screen unplugged.
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Thank you for the question. The DL1030U Chevy Cruze DashControl will display a particular OBD-II parameter on the information center and the radio. Since it's designed specifically to display a parameter on the radio, you wouldn't be able to display anything if that screen was unplugged. You'd only be able to take advantage of the Driver Information Center.
Helpful?
Yes · 0
No · 0
Report
Jaxen
· 6 years ago
Why does this not work for the 2016? Figured it would but it doesnt.
1
answer
Answer this Question
Murt · 6 years ago
When you say it doesn't work -- you don't get anything? Can't get connected? That could be a problem with the app on your phone not making the bluetooth connection. It could also be the adapter is dead. You might want to try a friends cell phone, works fine for me on a Galaxy S8, download the app and see if it will work...
Helpful?
Yes · 0
No · 0
Report
Ask a question