Autometer Spek-Pro 52.4mm 0-120 PSI Digital Stepper Motor Oil Pressue Gauge

Product P325328 DESCRIPTION:
The life blood of your engine, a lack of oil pressure is one of the most catastrophic scenarios that can happen. Knowing the precise pressure is critical to both its longevity and performance, as well as your peace of mind. AutoMeter’s Digital Stepper Motor Oil Pressure Gauge utilizes the most advanced technology on the market to deliver accuracy and durability you won’t find anywhere else. Our advanced 1/8” NPT solid state pressure transducer (included) provides the best possible measurements with unparalleled resistance to vibration and heat. A direct plug in wiring harness is also included for ease of installation.
Feature Points
7 color user-selectable background illuminations (red, blue, green, white, yellow, orange, and violet) with adjustable brightness for day and night - with independent dimming of dial and pointer.
Configurable "High" and "Low" warnings using three on-instrument-face buttons
Pro-Control output enables a 1.5 amp load to activate a relay and trigger your choice of warning lights, external buzzers, fans, pumps, or features such as water/meth/nitrous injection.
Features a peak recall function, which enables the user to review high gauge readings. The highest reading will be stored by the gauge until it is cleared.
Solid-state data acquisition grade sending units provide unmatched gauge accuracy and withstand the harshest environments.
Includes patented light-weight, spin-on bracket and pre-wired harness for simplified installation.
Patented Wide Angle dial design provides the largest viewable dial available in a 2-1/16" gauge.
Precision 280° brushless stepper motor movement provides a quiet, fluid, and accurate pointer movement with superior dial resolution.
Ships With
Includes Sending Unit: 2211
Wire Harness: P19320
P12467
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
phoenix az
Review 1
Votes 0
★★★★★
★★★★★
1 out of 5 stars.
white light does not match Spek Pro fuel pressure
This gauge, though reading correct at idle, was consistently reading 100 PSI one day during spirited driving on my LS2 GTO. Perhaps correct, I do not know. I saw no warning lights from the engine (I still have the stock sensor which is warning light only). This gauge makes a noise easily heard when the car is not running, a solid state gauge should be silent (did not alert them about this but should have). the white light does not match the same model Spek Pro fuel pressure. I returned for examination. All they did was sent it back stating it passed all their tests. Perhaps they are correct about the PSI and my engine is really about to explode, but I know the color does not match, period.
Recommends this product ✘ No
more evident in real life, but still evident that color white does not match, same model Spek Pro.
Photo This action will open a modal dialog.
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
1 out of 5 stars. Read reviews for 2-1/16" OIL PRESSURE, 0-120 PSI, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
1.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
5
Questions
5
Answers
Questions
Ask a question
1–5 of 5 Questions
Sort by:
▼
Menu
Ericmahl
· 5 years ago
Installed my gauge, it seems to be having issues as I’m going through the modes, the dial just flickers around the zero reading when I try to set the high and low.. Any suggestions to what’s wrong?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Please give us a call at 866-248-6357 to better assist you with this.
Helpful?
Yes · 0
No · 0
Report
Locneil
· 5 years ago
Before installing it reads 13 pounds. Will it go back to zero when powered up?
1
answer
Answer this Question
Alex at AutoMeter · 5 years ago
Thank you for your question. This gauge will calibrate itself to zero every time you apply power. It is perfectly acceptable for it to arrive off zero.
Helpful?
Yes · 0
No · 0
Report
RODNEY27
· 5 years ago
does sensor come with the gauge
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Hello,
Thank you for your question. This does come with sending unit P/N: P13153.
Helpful?
Yes · 0
No · 0
Report
Josh D
· 6 years ago
how do you recommend wiring a multiple gauges together for 12v power ?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. You can tie all the 12v power wires for the gauges together and run one lead to a 12v power source using a 3 amp inline fuse.
Helpful?
Yes · 0
No · 0
Report
chew
· 7 years ago
Do you have this seris in just a vacuum gauge?
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi Chew, thank you for the question. There are no Vacuum only gauges in the Spek Pro line. You would have to consider something like our 3384, 4384, or 5784.
Helpful?
Yes · 1
No · 0
Report
Ask a question
You may also like:
HIGH POWER 30 AMP RELAY WITH MOUNTING BRACKET AND TERMINALS
Product #HPR
$25.54
OMNI-POD, LOW PROFILE MOUNT, 2-1/16" GAUGE
Product #2205
$29.77
2-1/16" WATER TEMPERATURE, 100-300 °F, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P346328
$223.49
2-1/16" OIL TEMPERATURE, 100-300 °F, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P322328
$254.41
2-1/16" VOLTMETER, 0-16V, DIGITAL STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P344328
$213.66
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P314328
$266.10
Also Purchased With
2-1/16" OIL PRESSURE, 0-100 PSI, STEPPER MOTOR, ELITE
Product #5652
$283.63