VR6 CONVERSION AXLES - MK1 Driver Side Only

EWPMK1DR01

MK1 VR6 axles from our VR6 conversion kit.

Works only with Eurowise built mounts. These will work with 02a/02j transmissions (02J with 100mm output shaft hubs ONLY). If you have a late model 02j from a MK4+ chassis you more than likely have 108mm hubs. You need to remove and install 100mm joints.

Some additional items may needed to taken into account when swapping.

• When running 02j transmission and running our manual cable conversion you will have interference issues with reverse switch, when using 02j shifter tower or transmission you must cut off the mounting flange for the reverse switch.
• Late model 02j transmission (1.8t and VR6) have 108mm axle flanges. These will not work with our axles. However the solution to change axle flanges are very easy- Part Numbers needed are: qty 2 02A-409-355D qty 2 02j-409-359.