Fleece Performance 06-13 Dodge 5.9L Cummins CP3K2 Harnesses

$103.15 CAD

Fleece Performance SKU: FPE-CP3X2

<p>Earn [points_amount] when you buy this item.</p>

FPE-CP3X2

Take full control of your Cummins dual CP3's using your just your ECM. The CP3X2 harness allows you to control your Cummins dual pumps without an expensive dual pump controller. 

We recommend multiplying the stock FCA current table (D0787) on the Cummins ECM's by 1.6-1.7 as a place to start. The FCA current varies from truck to truck based on the solenoid characteristics, age, and idle lift pump pressure. Higher lift pump pressures at idle will require more amperage at the top of the table (low desired fuel flow) to keep the rail at it's target pressure. If the truck will not start after multiplying the table by 1.7, revert back to the original tune and multiply by a smaller number until the truck starts easily, yet maintains the target rail pressure at idle. This is one of the more time consuming calibration procedures on heavily modified trucks, so make calculated changes, so that you can dial it in as quickly as possible. Once you have the truck idling at the correct target pressure you may need to modify the middle and lower portions of the table to prevent rail pressure overshoot or undershoot. Again, methodical changes in the FCA table will yield the best results. Use the EFILive Scan Tool to log your changes and adjust in the Tuning Tool as necessary. Keep in mind, more current is less flow, and less current is more, zero current being full flow from all pumps. Theoretically you should be able to control 3 pumps. The table will allow the driver to deliver up to 5 amps of current.

 

CP3x2 FCA Current Graph

 

  • 2003 Dodge Ram 2500/3500 5.9L 24V Cummins
  • 2004 Dodge Ram 2500/3500 5.9L 24V Cummins
  • 2005 Dodge Ram 2500/3500 5.9L 24V Cummins
  • 2006 Dodge Ram 2500/3500 5.9L 24V Cummins
  • 2007 Dodge Ram 2500/3500 5.9L 24V Cummins
  • 2007.5 Dodge Ram 2500/3500 6.7L 24V Cummins
  • 2008 Dodge Ram 2500/3500 6.7L 24V Cummins
  • 2009 Dodge Ram 2500/3500 6.7L 24V Cummins
  • 2010 Ram 2500/3500 6.7L 24V Cummins
  • 2011 Ram 2500/3500 6.7L 24V Cummins
  • 2012 Ram 2500/3500 6.7L 24V Cummins
  • 2013 Ram 2500/3500 6.7L 24V Cummins
  • 2014 Ram 2500/3500 6.7L 24V Cummins
  • 2015 Ram 2500/3500 6.7L 24V Cummins
  • 2016 Ram 2500/3500 6.7L 24V Cummins
  • 2017 Ram 2500/3500 6.7L 24V Cummins
  • 2018 Ram 2500/3500 6.7L 24V Cummins

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.