SMG/K KIT LEA-MF6/L15A T=0.8

SMG/K KIT LEA-MF6/L15A T=0.8

$294.99 CAD

HKS SKU: 23009-AH001

 More payment options

Earn 294 Points when you buy this item.

Pickup available at Park Auto Motorsports (can be backordered) Please Contact for Availability
Usually ready in 24 hours (can be backordered) Please Contact for Availability

Description <POINT-1> <POINT-2> Availability

23009-AH001

HONDA
CR-Z
2011 - 2016
LEA-MF6

■Feature

  • High engine output parts. Factory replacement type.
  • The shape of the exhaust gasket is the same as the factory gasket.
  • Improved the bore seal proof stress at high engine output and boost pressure by redesigning the structure without upgrading the Head Bolt. (Bore seal pressure of the contacted surface was improved by 20%)
  • In-house test at 300PS confirmed the durability and safety.
  • 2 types of the Head gasket kit are available; the 0.8mm type is for the factory replacement, and the 1.2mm type for the compression ratio adjustment.
  • The Exhaust Manifold Gasket uses the 3-layer seal bead design (t=0.6). (The factory is 2-layer design (t=0.4))
  • The bore size is enlarged to 75.0mm from the 74.0mm factory gasket bore size.

 

  • To maintain the bore seal proof stress, the stopper’s height was adjusted. Narrowing the width enables the high proof stress with the factory Head Bolt axial tension. Also, optimizing the bead plate’s angle of the oil and water cooling sealing part improved the sealing’s contact pressure without affecting the bore sealing’s contact pressure. Fully coated gasket’s surface can improve the rigid connection of the cylinder head and block when installing the gasket.
  • The 3-layer exhaust gasket improves sealing durability to be used under high exhaust pressure.

 

 

■Performance

●Independent Bore Stopper & Seal Bead ⇒ Separated Type

 

  • The bore stopper and bead are separated as placing the stopper that the tightening force is concentrated around the bore, and placing the bead around the stopper. The bore stopper load can be increased with this design, which is not possible with the factory combined type. Also, the separated type can prevent the cylinder head and cylinder from deforming since the stopper is located inside the hard bead plate.

 

 

■Performance verification

* The pressure is equally and strongly applied to HKS Head Gasket comparing to the factory gasket.

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.