5 Cylinder Additive Kit (Step 1) - Liqui Moly LM20002KT2

At FCP Euro we take preventive maintenance seriously and we believe you should too. We have looked into the most common maintenance items that are missed by owners and created a kit that will help them get the most value out of their vehicles, and above all protect their investment.

This kit was designed for the modern 4 cylinder Gasoline engines both Direct Injected and non Direct Injected found in various European vehicles in the US Market.

We paired products that complement each other and work together to create the highest levels of protection for your vehicle.

Included in this kit are:

2 x LM2037 Pro-Line Engine Flush

• The flush gently cleans the insides of the engine and helps with the removal of dirt and sludge that has built up over the years.
• Pour in 1 bottle for every 5 Liters of oil. Run the vehicle at idle for 10-13 minutes. (DO NOT DRIVE VEHICLE!!!) Then proceed with draining the oil, replacing the oil filter and pouring in fresh oil from Liqui Moly.

2 x LM20002 CERA TEC oil additive

• CERA TEC helps protect the engine by coating all the moving parts that come in contact with your oil in a ceramic coating.
• This coating helps level out scoring and wear on items such as (Cams, Cylinder Walls, Rod bearings etc)
• It also helps reduce friction after the engine has been treated. (Coating takes place within 700 miles)
• Add 1 bottle of CERA TEC for every 5 liters of oil. (CERA TEC has a milky color to it and when the engine is cold it may appear as if excess water is in the engine. This is normal)
• CERA TEC is designed to be used every 5th oil change or every 25k miles.

1 x LM2030 Fuel System Cleaner

• This powerful Fuel System Cleaner helps keep your fuel system in tip top shape, from your low pressure pump, to your high pressure pump down to your injectors.
• It has been Designed to clean your injectors and help keep carbon deposits to a minimum.
• Fuel System Cleaner should be used every 20-25k to freshen the system up.

2 x LM20206 Viscoplus for Engine Oil

• stabilizes loss of viscosity
• optimum lubrication under all operating conditions
• fully compatible with mineral and synthetic oils
• reduces engine noise
• optimum oil pressure under all operating conditions
• reduces oil consumption
• improves the movable seal between piston and cylinder
• reduces wear

Can contents (300 ml) are sufficient for 1.3 gal (5 l) of motor oil. The product can be added at any time. Minimum oil filling of 0.8 gal (3 liters) (3.17 U.S. QT) is requested for optimum product performance.

This selection of treatments should be used together to ensure your engine enjoys a clean and trouble free life. It is suggested that this kit be purchased every 5th oil change or every 25k miles. This is what is deemed to be the first step in preparing your engine for proper care.

Fits These Cars