Audi B7 - P3 Vent Gauge

bP3AB7X

P3 Boost gauge

• Hard-wires in to power and ground and requires analog tubing to be run and connected to intake / charge pipe (does not plug into OBD2 port)
• Boost and vacuum with peak recall
• Battery voltage readout and quick-check even when the vehicle is shut off
• Manual dimmer with optional auto-dim feature
• Can be configured for both constant power and switched power installations
• Includes digital display, power supply unit (with integrated 80psi analog boost sensor), vacuum tubing, wiring harness and related hardware (does not include boost tap)

OEM vent option

• We install the display in an OEM vent to make your install even easier.

The P3 Boost gauge is an entry level digital boost gauge that retains the clean OEM look of your vehicle's interior. This gauge gets hard-wired to power and ground and is then tapped into your intake or charge pipe for a direct boost reading up to 80psi using it's integrated analog boost sensor. With peak recall and battery check all in the same streamlined display, this offers much more than your average boost gauge.

DOES NOT SUPPORT TDI

P3 Multi-Gauge

• Plug and Play install - just plug into your obd2 port and install into dash!
• Reads and clears OBD2 Codes
• OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
• Peak Recall on all functions
• Boost and Vacuum from OBD2 port
• Optional 80psi analog sensor
• Optional Auto-Dim or Manual Dimmer
• 2 x universal 0-5v linear analog inputs
• Includes digital display, custom OBD2 wire harness and control box.

Track Pack software upgrade

• Adds Air/Fuel ratio through the OBD2 port
• Adds 0-100/60-130/60-0/100-0 timers
• Changes IAT to post-cooler sensor on 3.0T

Optional 80psi boost sensor 

• Allows gauge to read boost directly from intake/charge pipe
• Plugs directly into the OBD2 harness (no wiring required)
• Can be added/removed from the gauge at any time

Tubing kit

• Approximately 60" of 5/32" O.D. flexible plastic tubing
• 5/32" O.D. "T" fitting
• 3 sections of 5/32" I.D. vacuum hose
• TSI/TFSI tap kit available on our accesories page

OEM vent option

• We install the display in an OEM vent for your vehicle to make your install even easier.

P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. 

All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more. See www.p3gauges.com/install for more details.