Seizmik 24+ Polaris/Cam-am/Honda/Kaw Photon Sideview Mirror Adj. 1.75-2 in. ROP -Pair

The new ball joint and low profile clamp allow for a wide range of motion and break away feature, and accommodates the various A-pillar angles created by OEM or custom cages. Clamp sizes available will accommodate most any UTV: 1.75” round tube ROPS; 2” round tube with included shims for 1.875” round tube ROPS; and Polaris Pro-Fit or Can-Am Profiled ROPS.

The Photon Side View Mirrors include replaceable, convex mirror glass and, as always, are backed by Seizmik’s Unlimited Lifetime Warranty. We don’t care if your cow eats the mirror, or you shoot it, we’ll send you the replacement parts needed to repair the mirror for FREE.  SERIOUSLY.  FREE.  And, you can customize your Photon Side View Mirrors to match your ride with our Color Cast Aluminum Trim Kits (sold separately).

BREAKAWAY GEOMETRY

Low Mass Ball Joint Block Design allows the mirror to be set tightly in position and still be allowed to break away.

ARTICULATING MOUNTING GEOMETRY

Adjusts the mirror’s horizontal position to accommodate roll cages with shallow angle pillars.

REINFORCED SOLID ALUMINUM HOUSING

Cast Aluminum Housing with internal structural reinforcement ribs provide a rigid and tough housing with a lifetime warranty.

SOLID ALUMINUM MIRROR GUARD

Full Perimeter Bezel constructed from solid cast aluminum for the ultimate durability and protection.

SOLID ALUMINUM LOCK BLOCK

Solid Aluminum Ball Joint Lock Block with stainless steel set-and-forget tension bolts provide amazing stability and locking power.

STAINLESS STEEL BALL JOINT WITH NYLON BEARING

Nylon Ball Joint Bearing provides smooth movement while allowing the mirror to be stabilized in place during extreme riding conditions.

ALUMINUM ACCENT BADGE

Solid Cast Aluminum Accent Badge secured by stainless steel bolt.

304 STAINLESS STEEL HARDWARE

Corrosion Resistant Hardware for years of reliable performance.

Fitments*:

Part # 18112—Fits any 1.75″ to 2″ ROPS vehicle including the following UTVs:

• Polaris Full and Midsize Round Tube Ranger
• Polaris RZR
• Kawasaki KRX 1000
• Kawasaki Teryx
• Kawasaki Mule with 1.875” ROPS
• Honda Talon
• Honda Pioneer 1000
• Can-Am Commander
• Can-AM Maverick (the original Maverick)
• Can-Am X3
• Can-Am Maverick R
• John Deere Gator
• Textron Wildcat
• Textron Wildcat XX
• Yamaha Viking
• Yamaha Wolverine
• Kubota RTV 900
• Kubota RTV 1140
• Kubota RTV-X 900
• Kubota RTV-X 1140

Part # 18107—Fits any 1.75” ROPS vehicle including the following UTVs:

• Polaris Full and Midsize Round Tube Ranger
• Polaris RZR (for Pro XP, see 18108)
  NOTE: Polaris RZR Polycarbonate Lock and Ride windshields require notching the windshield to work with the clamps.
  * Does NOT fit 2024 RzR XP 1000
• Kawasaki KRX 1000
• Pioneer 1000
• John Deere Gator
• Textron Wildcat
• Textron Wildcat XX

Part# 18108—Fits any 2” or 1.875” ROPS vehicle including the following UTVs:

• Polaris RZR Pro XP (for other RZR models, see 18107)
  NOTE: Polaris RZR Polycarbonate Lock and Ride windshields require notching the windshield to work with the clamps.
• Honda Talon
• Can-Am Commander
• Can-Am Maverick (the original Maverick)
• Can-Am X3
• Kawasaki Teryx
• Kawasaki Mule with 1.875” ROPS
• Yamaha Viking
• Yamaha Wolverine
• Kubota RTV 900
• Kubota RTV 1140
• Kubota RTV-X 900
• Kubota RTV-X 1140

Part# 18109—Fits any Pro-Fit or Profiled vehicle including the following UTVs:

• Polaris Pro-Fit Full and Midsize Ranger
• Polaris General
• Can-Am Defender with Profiled ROPS
• Can-Am Maverick Trail/Sport with Profiled ROPS