CJM Industries Chassis Mounted Splitter V4 - Mk7.5 GTI

All sales are final.

Made in USA - 2 year warranty. 

Please read these product details thoroughly for fitment and installation requirements. This can be completed in a driveway with basic tools.  Professional install recommended if you are not comfortable removing the front crash bar. 

• Brackets & rods come in raw aluminum, expect some visible imperfections in the material from the cutting and bending process.
• This will not fit with any front mount/twin intercooler.
  
• If you are on air ride, do not air-out onto these brackets, they are not designed to support the weight of an entire vehicle. 
• Speed tested to 160mph.  
• Requires drilling four 11mm holes in the crash bar for install. 
• Trimming of the factory splash guard is required (not the bumper).  
• Brackets are made of 5052 Aluminum, these mount to 6 points of the chassis/crash bar. 
• The brackets and rods are raw aluminum and contain zinc coated steel hardware.
• If you are in a region that salts the roads in the winter, this will increase the need to clean and maintain each component more frequently. We can apply a clear coating called Sharkhide, but it will not last forever, you will need to recoat them over time to If you want to prevent discoloration over time. You can also powdercoat or paint with a rattle can for easier maintenance. 

Each Order includes:

- Top Driver & Passenger side Bracket

- 2x bottom Brackets with pre-installed rivnuts for the lip/blade

- Center support brace with pre-installed rivnuts for the lip/blade

- Flange head bolts and nylock hardware for adjustable height settings

- M10 Flange head bolts and nylock hardware to mount to the Chassis. 

- M10 countersunk hardware to attach a blade to brackets (3/8" or thinner blade)

- Blue medium threadlocker for blade bolts. 

- 9mm thick splitter blade with a radiused edge. 

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov