Up to 330% more flow than stock

This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

 

• New Build:
• This option includes a new LPFP bucket that is upgraded with new Walbro 525 pumps, filters, and fittings.  No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket.

• Both options include the following:
• A complete plug and play solution by simply replacing your stock bucket.  However, to utilize the secondary, an additional wiring harness must be installed.
• Two new Walbro filters
• A custom fitting that is tuned to optimize the venturi and pump output
• Spare vent tube clip
• Wiring harness for the secondary
• Flow testing prior to shipping
• Two new E85 compatible Walbro  525 pumps (F90000285)

• Recommended Accessories:
• Lock Ring Removal Tool
• Return line fitting
• This option is for those customers that will be running an external fuel pressure regulator (FPR).  You will need this to install your return line from the FPR to the tank.
• Hobb's Switch
• This option is for those customers that will be using a boost referenced switch to trigger the secondary on their Stage 3 pump. 

•  Compatible with the following vehicles:
• 1' E88         (11/2006 — 10/2013)
• 1' E82         (11/2006 — 10/2013)
• 3' E90         (02/2004 — 09/2008)
• 3' E90 LCI   (07/2007 — 12/2011)
• 3' E91         (02/2004 — 08/2008)
• 3' E91 LCI   (07/2007 — 05/2012)
• 3' E92         (05/2005 — 02/2010)
• 3' E92 LCI   (11/2008 — 06/2013)
• 3' E93        (09/2005 — 02/2010)
• 3' E93 LCI   (11/2008 — 10/2013)
• X1 E84       (04/2009 — 06/2015)

PLEASE CONTACT US WITH ANY QUESTIONS YOU HAVE

- All Stage 3 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

• Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced.

• Click on one of the links below to download your installation guide

 Stage 3 Install Guides...

    

 Product Videos