Gruven Adjustable Swaybar Links (Front) - Fiat / 500

G_FIAT500_ADJ_End_Links

These beautiful adjustable sway bar end links are made from aircraft grade 303 Stainless Steel to replace the flimsy non-adjustable OEM spaghetti links.  We then add super strong 6,000 lbs radial load capacity THK sealed ball joints on either end to provide many years of noise free operation.  Our ball joints have a built in dust boots to seal out the elements and do not require any maintenance.  If they ever do need to be replaced, they can replaced separately.  These linkages will not deflect under the hardest track corners and will provide the most accurate handling.  

All center sections are powder coated with a thick layer of either Gloss Black or Rosso Brilliante - please choose your color during check out.

Our design allows simple and quick adjustment on the car.  Simply loosen the jam nuts at either end and spin the center body portion to lengthen or shorten, then retighten the jam nuts.  This adjustable design will provide ~ +/- 1 inch of adjustment on the car (~10.2" to ~11.75" center to center length) which is enough to handle most lowered (or raised) set ups.  You want the stabilizer bar end links to be as vertical as possible, perpendicular to the swaybar itself to avoid any loading in the fwd/aft direction.  These can be shortened more if you want by trimming the threaded section down.  Please keep at least 5 threads engaged into the spherical joints.  This product comes with new attaching hardware.