VOR4CK218-020LComplete System
Complete, fully calibrated supercharging systems are available for the 2006-2010 6.1L Jeep Grand Cherokee SRT8 , featuring the V-3 Si-Trim centrifugal supercharger with air-to-water charge cooler.
The complete high output system will boost your stock 2006-2010 SRT8 Jeep to 560 HP and 510 lb/ft torque with 8 PSI from the V-3 Si-Trim supercharger at the factory redline.
The 6.1L SRT8 Jeep systems utilize Vortech's V-3 superchargers. Continued development in Vortech's Lab resulted in the Si-Trim Model. With its state of the art centrifugal compressor stage this Si-Trim literally blows away the competition. Industry leading 78% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability. Also, Vortech's supercharger systems weigh less than half of the low-tech competing brands.
Superior Technology
Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.
Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decreases.
Additional Kit Options
For higher-horsepower, custom-tuned installations we recommend a tuner kit, which does not include a fuel pump, fuel injectors or ECU programmer. This requires you or your installer to provide custom calibration and the required fuel components. The V-3 Si-Trim supercharger included with the tuner kit is capable of up to 775HP on modified vehicles. Tuner kits are also available with the 950HP capable V-2 H/D Ti supercharger for higher performance or racing vehicles. Call Vortech or your dealer for more information.
Complete System Included Components and Features
- Vortech V-3 Si-Trim gear driven, self-lubricated centrifugal supercharger
- Technologically advanced, high-efficiency impeller and housing design developed in our SAE J1723 compliant supercharger test cell.
- Manifold boost pressure: 8 psig @ redline on stock engine
- Supplied handheld programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.
- Fuel management upgrades include high-flow replacement fuel injectors, 2 Bar MAP sensor, and fuel pump voltage booster
- Integrated dual-pass air-to-water charge cooler configuration features a closed loop water cooling system with stand-alone pump, tank and front mounted heat exchanger
- High-flow bypass valve provides for surge-free compressor operation
- Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
- Billet aluminum mounting bracketry for "factory installed" appearance and rigidity
- Complete bolt-on system including all necessary belts, pulleys and reusable high-flow air filter
Installation
Installation time is rated at approximately 8-10 hours.
INSTALLATION MANUAL
CARB Compliance
Complete systems are 50-State emissions legal per California Air Resources Board (CARB). CARB Executive Order (E.O.) # D-213-31.
Optional Parts/Accessories- Supercharger Pulleys
20mm Cog S/C pulleys: 4GR033-034, 4GR033-032, 4GR033-030, 4GR033-028
Jackshaft 20mm Cog Pulleys: 4GR032-034, 4GR032-032, 4GR032-030
Jackshaft Serpentine Pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287, 2A036-262
- Bypass/Blowoff Valves
8D204-111 - Maxflow Race Blowoff Valve (BOV), Black Anodized
8D204-113 - Maxflow Race Blowoff Valve (BOV), Clear Anodized
This website does not show live stock.
If the product is in stock we ship same/next day.
If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.
Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.
Please contact us for an accurate ETA and availability.
