VTT silicone Charge Pipes are the premiere choice for your EBM Charge Pipe needs. Made from high quality, wire impregnated silicone, these inlets are a full 6mm thick, and can withstand even the harshest underhood conditions.
Product Description
Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.
You can find other S55 silicone charge pipes on the market, but they are a direct copy of the flattened factory pipes and use poor quality worm clamps on all connections which can cut, and dig into silicone connections.
Note: These charge pipes come the proper length to fit cars equipped with a Port Injection spacer, with no adapters needed.
The kit includes:
- 2 Silicone Charge Pipes in your choice of 3 colors
- 2 Billet turbocharger outlet adapters hard anodized black for a lasting finish
- 2 Stainless Steel liner clamps specifically designed for silicone hose from turbocharger adapter to charge pipe
- 2 Steel liner clamps specifically designed for silicone hose from charge pipe to intercooler
NOTE: The engine cover may need to be trimmed slightly to fit the charge pipes