USP Cool Flow Filter Housing Combo For 1.8T and 2.0T Gen3

If you have looked under the hood of your car you may have noticed that your 1.8T and 2.0T generation 3 TSI turbo engine is equipped with an oil filter inside a fragile plastic housing. Each time you perform an oil change this housing needs to be removed. Unfortunately the plastic filter housing becomes brittle over time and often cracks during oil changes which are performed regularly. Constructed of billet aluminum, the USP Cool Flow housing is far stronger than the factory plastic housing. Not only is the Cool Flow housing stronger, but it also incorporates cooling fins to help cool engine oil as it passes through the filter and housing.  For this reason the experts at USP have assembled this kit which includes engine oil, replacement oil filter, oil filter o-ring, and the USP Cool Flow Oil Filter Housing.

Just like your engine is equipped with a plastic filter housing so is your DSG transmission. The plastic DSG filter housing is susceptible to becoming brittle over time and often cracks during filter changes which are performed every 40,000 miles. Constructed of billet aluminum, the USP Cool Flow housing is far stronger than the factory plastic housing. Not only is the Cool Flow housing stronger, but it also incorporates cooling fins to cool the DSG fluid as it passes through the filter and housing. Installation is straight forward and requires no special tools. 

Purchase both filter housings together and save 10%, no coupon required. 

FOR DQ250 Transmissions ONLY!!! Does not fit 2019+ GTI