Autometer American Muscle 5in Tach Speedo Combo In-Dash

$918.37 CAD

AutoMeter SKU: atm1295

<p>Earn [points_amount] when you buy this item.</p>

Product 1295 DESCRIPTION:
Save space on your dash and provide a clean look with AutoMeter’s Electronic Tach/Speedo Combo. Taking the highly precise circuits from the individual speedometer and tach and combining them into one unit gives you the accuracy and the response time you need and the convenience of a one piece solution. Compatible with nearly any factory speed sender and 1-12 cylinder applications, this unit is simple to calibrate and designed with the type of durability you expect in an AutoMeter gauge. AutoMeter’s GPS Speed Sender is also compatible for an easy, plug and play solution.
Feature Points
Modern white LED through-the-dial lighting provides clear visibility during nighttime use
Gauge kit includes mounting hardware, and installation instructions
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors. Speedometer can be easily calibrated using the trip reset button on the from of the unit and a premeasured two mile distance. No dip switches!
Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination with a simple push button, 2 mile drive calibration.
Ships With
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5" TACHOMETER/SPEEDOMETER COMBO, 8K RPM/120 MPH, ELECTRIC, AMERICAN MUSCLE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
13
Questions
12
Answers
Questions
Ask a question
1–10 of 13 Questions
Sort by:

Menu
Ramiam
· 3 years ago
WILL THIS FIT THE 1966 MUSTANG O.E. DASH CLUSTER
1
answer
Answer this Question
Matt from AutoMeter · 3 years ago
This tach/speedometer combo fits into a 4-5/8 inch diameter hole. The overall OD is 5 inches.
Helpful?
Yes · 0
No · 0
Report
Reggie71
· 3 years ago
Does the gauge have a trip meter?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Yes, this gauge does have the trip meter on the face of it.
Helpful?
Yes · 0
No · 0
Report
crago70ss
· 4 years ago
Can I use the GPS sensor part number 5289 on the electric American Muscle Speedometer.
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Yes, 5289 will work with any AutoMeter Electronic Programmable Speedometer.
Helpful?
Yes · 0
No · 0
Report
Mac53
· 4 years ago
Hi there, is it likely this speedo will be made in metric KPH in the future i like the gauge but require it in metric for Aust. Thanks
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. We do not have plans to make this in metric units right now, but we do have an American Muscle speedometer in KMH. It is model number 1288-M.
Helpful?
Yes · 0
No · 0
Report
Sal D.
· 4 years ago
Can the LEDs in these gauges be dimmed?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Hello! LED lights can be dimmed with the Dimming Control Module, Model #9114.
Helpful?
Yes · 0
No · 0
Report
Grillo
· 5 years ago
Can this speedo and tacho combination be made in a 3 3/8 diameter gauge.
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
We only offer this gauge in a 5" for this series.
Helpful?
Yes · 0
No · 0
Report
AMX Fred
· 5 years ago
Hi there. Is the 5" diameter the outside of the trim ring.? My dash gauge hole is 4 3/4". Thank you, Fred
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
The OD is 4-15/16".
Helpful?
Yes · 0
No · 1
Report
NED KONA
· 6 years ago
FITMENT HARLEY 2001 FLSTS
1
answer
Answer this Question
Jim from AutoMeter · 6 years ago
The 1295 is an automotive unit, not sealed or designed for motorcycle use. In addition, while it will go into a 4-5/8" hole similar to what is on your bike, speedo tach is deeper than your OEM speedo, and will bottom before completely into the dash panel.
Helpful?
Yes · 0
No · 0
Report
George23
· 6 years ago
I have a 1972 Buick riviera Would like to know if this speedo gauge with the tac comes with oil pressure water temperature volt gauge and fuel gauge , all in one gauge? And if so can I have the part number
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. The matching quad gauge is #1225.
Helpful?
Yes · 0
No · 0
Report
Earl
· 7 years ago
I drive a 1987 GMC caballero. Which is a el Camino. The speedometer is cable and I wanted to install the American Muscle speedometer guage. Do I need an adapter for the installation of the guage since its electric.
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi Earl, thank you so much for the question. You'll need our 5291 Sender, which you can see here: https://www.autometer.com/hall-effect-speedometer-sender.html
This will thread onto where your cable would be on the transmission and will send a signal to any of our electronic programmable speedometers.
Helpful?
Yes · 0
No · 0
Report
1–10 of 13 Questions
Previous Questions

Next Questions

Ask a question
You may also like:
RPM SIGNAL ADAPTER FOR DISTRIBUTORLESS IGNITIONS
Product #9117
$113.58
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15
WIRE HARNESS, PLUG & PLAY GM LS ENGINES, FOR #9117 TACHOMETER ADAPTER
Product #2189
$109.29
Also Purchased With
5" TACHOMETER/SPEEDOMETER COMBO, 8K RPM/120 MPH, ELECTRIC, PRESTIGE BLACK DIAMOND
Product #2091
$467.99

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.