AutoMeter Gauge Speedometer 5in. 120MPH Elec. Prog. W/ Lcd Odo Arctic White

Product 1389 DESCRIPTION:
AutoMeter’s Electronic Programmable Speedometer provides an easy-to-install and easy-to-calibrate solution that will help keep your speed exactly where it needs to be. These accurate and responsive speedometers are compatible with most factory and aftermarket speed senders, and you’ll wonder why you ever struggled with a speedometer before. Calibration is as simple as a two mile drive, or for even easier operation, AutoMeter’s GPS Speedometer Sender is a simple solution for any AutoMeter Programmable Speedometer.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
Compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Simple push button, 2 mile drive calibration. No dip switches!
Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination.
Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Domed Lens
Ships With
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Ohio
Review 1
Vote 1
★★★★★
★★★★★
4 out of 5 stars.
How to set Odometer
I just purchased the 1389. How do I set the odometer to match the mileage currently on the vehicle? Thanks. Jimmy
Helpful?
Yes · 1
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
4 out of 5 stars. Read reviews for 5" SPEEDOMETER, 0-120 MPH, ELECTRIC, ARCTIC WHITE
4.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
3
Questions
3
Answers
Questions
Ask a question
1–3 of 3 Questions
Sort by:
▼
Menu
El Guente
· 2 years ago
On the incandescent backlight model, should I still connect to the 12v Dash Lighting terminal?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
There is no need to connect to the "Lamp" spade on the back of the unit if the socket has a white wire and black wire coming out of the back. For further assistance please give us a call at 866-248-6356.
Helpful?
Yes · 1
No · 0
Report
JLR1
· 3 years ago
I ordered this part and am unable to get it to calibrate properly. I did the 2 mile process and when I push the button the last time the pin just bounces back and forth. HELP
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
This will likely require some additional context and troubleshooting with our Tech Team. Please give us a call at 815-899-0801 or send an email to service@autometer.com.
Helpful?
Yes · 0
No · 0
Report
Ericj
· 7 years ago
I have this mph gauge and a tremec tko 600. What sending unit do I need to make it work properly
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Eric, thank you so much for contacting us. There were a few iterations of that transmission, but the short answer is, if so equipped (which is likely), just use the Tremec speed sensor output.
If it's an older unit with only a cable drive for your speedometer, you'd use the 5291 if it's a thread on style cable:
https://www.autometer.com/hall-effect-speedometer-sender.html
Or a 5292 for a Ford style "plug in" cable:
https://www.autometer.com/hall-effect-speedometer-sender-ford-plug-in.html
Or perhaps easiest of all, your could use our GPS sender which works on any application as it doesn't have any connection to the transmission:
https://www.autometer.com/universal-gps-speedometer-interface-module.html
Hope this helps!
Helpful?
Yes · 1
No · 1
Report
Ask a question
You may also like:
Also Purchased With