Autometer Pro-Cycle Gauge Tach 3 3/4in 8K Rpm 2&4 Cylinder Black

Product 19300 DESCRIPTION:
Since 1957, AutoMeter has set the standard in performance, accuracy and durability with their legendary Tachometers. The absolute pinnacle of engineering and technology, it’s no wonder AutoMeter can lay claim to more motorsports victories than every other gauge manufacturer combined. The patented air core meter movement, wound in house to exacting standards, can move the needle from 0 - 8,000 rpm in 333 milliseconds. An inaugural inductee to the Hot Rod Speed Parts Hall of Fame, no other tachometer on the market has had anything approaching its impact on professional racing. Built for a lifetime of service under the harshest conditions, this is the no compromise tach for no compromise builds. When you’re ready for the best, there isn’t another choice.
Feature Points
Vibration and water-resistant design
Designed to work with all single-fire and dual-fire ignitions
Matching speedometer sold separately
Features the same hard-core design found throughout the Pro-Cycle line
Ships With
Wire Harness: YES
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Tulsa, Oklahoma
Review 1
Votes 4
★★★★★
★★★★★
5 out of 5 stars.
Mounting on a 2002 Harley Davidson STDI
Just installed the Auto Meter 19300 on my 2002 HD STDI with mini ape hangers. The mounting cost about $60.00. Two of the Turning House 1 1/4 inch bar clamps $12.00, Galvanized steel flat bar 1 in wide x 1/8 in thick x what ever length, I used 7 1/2 inches of the flat bar $6.00, the Auto Meter 19243 tachometer mount. I made a paper mock-up of the flat bar which allowed me to use the 1 in flat bar, carefully drilled the mounting holes for the bar clamps and the Auto Meter tach mount, 5/16 bolts, washer and nuts to attach flat bar, every thing painted, check the pictures.
Auto Meter 19300
Photo This action will open a modal dialog.
Bar clamps, 5/16 bolts & nuts, 1in x 1/8 in thick flat bar & Auto Meter 19243 Tach Mount
Photo This action will open a modal dialog.
Mount on the Harley
Photo This action will open a modal dialog.
Mount on the Harley
Photo This action will open a modal dialog.
Auto Meter 19300 installed
Photo This action will open a modal dialog.
Auto Meter 19300 installed
Photo This action will open a modal dialog.
Helpful?
Yes · 4
No · 1
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
5 out of 5 stars. Read reviews for 3-3/4" TACHOMETER, 0-8,000 RPM, BLACK W/ CHROME BEZEL, PRO-CYCLE
5.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
10
Questions
9
Answers
Questions
Ask a question
1–10 of 10 Questions
Sort by:
▼
Menu
chuck norrez
· 2 years ago
i have a 2003 88 ci twin cam motor running off of a thunderheart stand alone ignition. it has provisions for a tachometer. it is a basic ignition system that is similar to any aftermarket system. would an autometer gauge work?
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
Our standard tachometers will not work in this application. Check our Pro Cycle line for options.
https://www.autometer.com/gauges/pro-cycle.html
Helpful?
Yes · 0
No · 0
Report
TexasLawman
· 3 years ago
Will it fit a 2007 Harley-Davidson Fatboy?
1
answer
Answer this Question
Steve from AutoMeter · 3 years ago
This will work on the bike if you have a bracket that will fit the gauge size. However we do not sell a bracket for bikes to make this work. For further assistance please call 866-248-6356.
Helpful?
Yes · 0
No · 0
Report
RedRyder
· 4 years ago
I am installing the 3 3/8 579-017 tach on a 2010 Kawasaki Vulcan 900 custom. Is the ignition pulse one or two? Can seem to find an answer. Your help would be great
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Hello! You will need to bench test the unit with it getting a signal from the bike. If the bike is not reading correctly while set to a 2 pulse, you will simply need to cut the brown wire in order to make it a 1 pulse to correct the reading on the tachometer.
Helpful?
Yes · 0
No · 0
Report
Grubby
· 5 years ago
Shift light/harley davidson '09 dyna
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. The 19300 does not have circuitry to support a shift light. Please call our Tech Support line for assistance: 866-248-6357.
Helpful?
Yes · 0
No · 0
Report
Olgoat
· 5 years ago
I have a 2019 Harley Fatboy w/114" M8 engine. Does Autometer offer a handlebar mounted tach that will work with these new motors?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. Unfortunately, we do not have anything that will be compatible with the CAN system on the new Harley's.
Helpful?
Yes · 0
No · 0
Report
Doc!!!
· 5 years ago
Hi! Does it work with the Redcam Harley system? Thank you!
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. The Redcam system should not affect operation of our tachometers.
Helpful?
Yes · 0
No · 0
Report
Kaz3Miles
· 6 years ago
I just installed it ... When IG S / W is turned off, the gauge shows around 400 RPM. The gauge shows 0 RPM when turning the IG on and off again. The gauge does not indicate more than 800 RPM when the engine is running. 1990y FXR Dyna-S Dual Fire system.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. We will need more information so we can help you troubleshoot your issue. Please reach out to our support team at 815.895.8141 or https://www.autometer.com/contacts
Helpful?
Yes · 0
No · 0
Report
BillyO
· 6 years ago
I have a 2018 Harley Road King and I need a tachometer that reads 1/2 pulse per RPM. I was going to use the 19300 tach (3 3/4) and connect the tachometer signal wire to the primary front cylinder wire on the coil. I noticed your tach uses 1 or 2 pulse.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Unfortunately, the recent model year Harley's use a CanBus system and we do not have any gauges that will work on that system.
Helpful?
Yes · 0
No · 0
Report
Randy
· 7 years ago
Does this come with a water resistant case and how can I mount it to the 1” handlebar on my Harley Sportster?
1
answer
Answer this Question
Joseph From AutoMeter · 7 years ago
Hi Randy, thank you so much for contacting us. This tach is indeed water resistant. For mounting, we've had very good luck with the mounts available through Yankee Engineuity and Cycle Performance. Here's a couple of links to check out:
http://paughco.com/2008-catalog/indivpages/Yankee%20Engineuity%20Main%20Product%20Page.html
http://motoitalia.parts/product-category/cycle-performance-products/
Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Seid
· 4 years ago
I am building a 1946 ford woody with a rough supercharged motor. The colors of the dial are close to the OEM instruments on the dash. Will the # 19300 tach work with the electronics for the car?
0
answers
Answer this Question
Ask a question
You may also like:
3-3/4" SPEEDOMETER, 0-120 MPH, ELECTRIC, BLACK, PRO-CYCLE
Product #19350
$360.49
3-3/4" SPEEDOMETER, 0-160 MPH, ELECTRIC, BLACK, PRO-CYCLE
Product #19354
$360.49
SHIFT LIGHT, AMBER LED, PEDESTAL, BLACK, QUICK-LITE
Product #5330
$73.19
SHIFT LIGHT, 12 AMBER LED, PEDESTAL, BLACK, SUPER-LITE
Product #5332
$109.99
TIRE PRESSURE, 0-60 PSI
Product #2160
$39.05
Also Purchased With
3-3/4" TACHOMETER, 0-8,000 RPM, WHITE, PRO-CYCLE
Product #19301
$284.46
3-3/8" TACHOMETER, 0-8,000 RPM, SILVER, PRO-CYCLE
Product #19302
$284.46