Autometer LS Plug & Play Tach Harness

Product 2189 DESCRIPTION:
If you’ve tried to get your tach to function after an LS swap, you know that it isn’t always a simple procedure. Save time, frustration and don't make a single cut in your factory wiring with AutoMeter’s Plug and Play LS Tach Harness. This Plug and Play solution lets you quickly and easily install the AutoMeter 9117 Tach Adapter onto your LS-derived engine. OEM spec connectors and wiring assure a hassle free installation that takes minutes rather than hours. No splicing, cutting or risks of voiding your vehicle's warranty. It’s completely reversible and couldn’t be easier. Get the best possible results in the least amount of time with the solution guaranteed to work right, the first time.
Feature Points
Does not alter factory wiring
Plugs into factory ignition coil connectors
3ft harness length
Flying leads to hardwire AutoMeter 9117 Tach Adapter
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for WIRE HARNESS, PLUG & PLAY GM LS ENGINES, FOR #9117 TACHOMETER ADAPTER
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
8
Questions
7
Answers
Questions
Ask a question
1–8 of 8 Questions
Sort by:
▼
Menu
C10 rhodes
· 9 months ago
I’m trying to get my ls to work with my 72 c10 tach will this work
1
answer
Answer this Question
Paul G. · 9 months ago
The #2189 harness will not work with OEM gauges.
Helpful?
Yes · 0
No · 0
Report
MGM 70
· 2 years ago
Hello I have a 06 Pontiac 3.9 with stock ECU the tach is a VDO 5150 do you have a tach adapter for this application Thanks steve
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
Hello,
Unfortunately we only have a plug and play for LS motors. The 9117 tach adapter is universal and can work on any other application that would need it.
Helpful?
Yes · 0
No · 0
Report
Dave1
· 2 years ago
I have a 2006 Gen IV LS2 crate engine with a Classic Instruments (non ZST) tach which is roughly 10 years old. Will the #9123 RPM signal adapter for LS engines incl. plug and play harness work for me?
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
The 9123 should work fine in your application.
Helpful?
Yes · 0
No · 0
Report
CarBros
· 3 years ago
I am looking to buy the PRODUCT #2095, I am building a 1950 Buick, It will have a complete LSA 6.2 Supercharged Motor and 6 speed trans installed, out of a 2015 Camaro ZL1. Will this harness work? Or do I need a different adaptor? Thnak You, Jim
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
If you are not getting a tach signal off the computer on your LS, you may need the 9117 adapter. If you required the 9117, this would allow for a simple plug and play installation of the adapter. We also offer a complete kit model 9123. This includes the 9117 and 2189.
Helpful?
Yes · 0
No · 0
Report
tom 1109
· 3 years ago
will this work with MSD 6010 and will I need any other adapters
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
hank you for contacting us. This tach adapter harness is specifically for our 9117 Tach Adapter.
Helpful?
Yes · 0
No · 0
Report
Biglou
· 5 years ago
I have a 2011 v6 camaro and I bought 2 after market glowshift clusters. 1 is a tachometer and the second is a water temperature cluster. Each spark plug has its own coil. Do I need an adopter to install these clusters?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi Biglou,
We cannot speak for any installation of Glowshift products. They are a different manufacturer, and you will need to contact them for installation advice.
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
Fredrich
· 6 years ago
What’s the difference between the 2189 and 9123 GM LS tach adapters? Thanks
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for the question. The 2189 wire harness plugs into the 9117 signal adapter. If you need to buy both the wire harness and the signal adapter, 9123 is a package including both the 2189 wiring harness and the 9117 signal adapter.
Helpful?
Yes · 1
No · 0
Report
Donald 1
· 4 years ago
the 9117 harness adapter will that plug into an LS9 2011 ?
0
answers
Answer this Question
Ask a question
You may also like:
RPM SIGNAL ADAPTER FOR DISTRIBUTORLESS IGNITIONS
Product #9117
$113.58
Also Purchased With
RPM SIGNAL ADAPTER FOR LS ENGINES, INCL. PLUG & PLAY HARNESS
Product #9123
$182.83