Autometer 5 inch 10,000 RPM Monster Shift Lite Pedestal Tachometer

Product 233904 DESCRIPTION:
Getting great performance or saving money doesn’t have to be choice. Engineered by AutoMeter in Sycamore, IL, The Auto Gage line of instruments provide the best bang for the buck performance in the industry. For a fast street car or a weekend racer, Auto Gage provides levels of accuracy and durability unheard of in the price category. With countless wins in magazine comparison tests, the best value in gauges comes from exactly the place you’d expect it to. AutoMeter.
Feature Points
Traditional incandescent lighting illuminates the front of the dial
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds
Compatible with most 4, 6, and 8 cylinder engines (2 - 4 pulse per revolution ignition signals) with points, electronic, and most 12V high-performance racing ignitions.
Optimize use of your engine's power band and improve vehicle run performance and driver gear changes with a rapid response, high visibility user-programmable shift light.
Ships With
3209
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5" PEDESTAL TACHOMETER, 0-10,000 RPM, SHIFT LIGHT, BLACK, AUTO GAGE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
27
Questions
23
Answers
Questions
Ask a question
1–10 of 27 Questions
Sort by:
▼
Menu
Confused one
· a year ago
Is there a lite bulb inside the case to light up the face of the tach?
1
answer
Answer this Question
Steve from AutoMeter · a year ago
The tachometer does have a bulb and socket which is in the front of the gauge.
Helpful?
Yes · 0
No · 0
Report
drangel
· 3 years ago
On my 1993 Ford Mustang GT where do i hook up the green tach wire to?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
On your coil you should have a tan wire with a yellow stripe. That would be the negative side of the coil. Unless you had something aftermarket like an MSD box. Then you’d hook the green wire to the tach output on the box
Helpful?
Yes · 1
No · 1
Report
dnb.business
· 4 years ago
Hi there, do you make international shipping? I'm from Argentina
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Hello, thank you for your question. Yes, we can ship internationally.
Helpful?
Yes · 1
No · 0
Report
Dank
· 5 years ago
What is the procedure to set the shift light rpm set points? When I press the menu button, the SHIFT mode does not come on.
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. Please call our Tech Support Team for assistance with setting up this tachometer:
866-248-6357
Helpful?
Yes · 0
No · 1
Report
salteen
· 5 years ago
can I take it off of a 1989 mustang 5.0 V8 and hook it up to a 1987 dodge power ram 50 I4 2.6L?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. You will need to purchase P/N: 9112 in order to use this gauge with that motor.
Helpful?
Yes · 0
No · 0
Report
andi
· 5 years ago
If this was previously used on a 4cyl engine and now will be installed on an 8cyl can you replace the rear wire loops?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. Unfortunately you cannot replace them. You will need to reconnect the wiring in order for the gauge to work properly on a v8.
Helpful?
Yes · 0
No · 0
Report
chris128
· 5 years ago
will this tach work with my MOPAR orange box eletronic ignition?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. Our tachometers typically will work on Chrysler Chrome, Gold, and Orange Box ignitions.
Helpful?
Yes · 0
No · 1
Report
Anonymous · 5 years ago
Will this work on a 1999 4.6 northstar.
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. This tach should work on your Northstar engine. The tach signal is found at the white wire at Pin 28 off the C2 (Clear) connector at your Engine Control Module. Like most GM engine speed signals, this will be a 2 pulse per revolution signal.
Helpful?
Yes · 0
No · 1
Report
Slick 87
· 5 years ago
Will this tach work on a 2013 fiat turbo
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. It certainly should, although you may need our 9117 tach adapter.
Helpful?
Yes · 0
No · 1
Report
Terry7222
· 5 years ago
can I run this on a points magneto
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. It depends of the coil is internal or external. If it has an external coil, yes, it is compatible. If it has an internal coil, then no, it will not be compatible.
Helpful?
Yes · 1
No · 0
Report
1–10 of 27 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
Also Purchased With