Autometer Ultra-Lite 127mm In-Dash Electronic Programmable 160 MPH Speedometer

Product 4489 DESCRIPTION:
AutoMeter’s Electronic Programmable Speedometer provides an easy-to-install and easy-to-calibrate solution that will help keep your speed exactly where it needs to be. These accurate and responsive speedometers are compatible with most factory and aftermarket speed senders, and you’ll wonder why you ever struggled with a speedometer before. Calibration is as simple as a two mile drive, or for even easier operation, AutoMeter’s GPS Speedometer Sender is a simple solution for any AutoMeter Programmable Speedometer.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
Compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Simple push button, 2 mile drive calibration. No dip switches!
Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination.
Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Ships With
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5" SPEEDOMETER, 0-160 MPH, ELECTRIC, ULTRA-LITE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
13
Questions
12
Answers
Questions
Ask a question
1–10 of 13 Questions
Sort by:
▼
Menu
birdshill204
· 2 years ago
Hi I am interested in the 4489 Speedometer, if the battery goes dead in the vehicle will the speedometer loose its memory. Thank you, Rick
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
This speedometer is designed to be powered completely off when the vehicle is not in use. Calibration and odometer reading are permanent, and not reliant upon any continuous power source.
Helpful?
Yes · 0
No · 0
Report
J Brown
· 2 years ago
Hi, i have a silver face pro comp ultra light Speedometer from 2004 # 4489 its not digital. can i please get a wire diagram for it. i would like to install it in my 1969 VW Bug.
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
The installation instructions can be found using the following link.
https://www.autometer.com/pub/media/manual/2650-1268.pdf
Helpful?
Yes · 0
No · 0
Report
David C
· 4 years ago
How does this wire up to my 4LE60 transmission
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. You will need to splice off the VSS (HIGH) from your PCM and send that signal to your speedometer. If you have further questions, please give our tech line a call at 866-248-6357.
Helpful?
Yes · 0
No · 0
Report
Anonymous · 4 years ago
Will this come complete to install 4LE60 transmission? Or is there other items I need to buy to get this to work?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Hello! If there is an electronic VSS (vehicle speed sensor) equipped on the 4LE60 trans, 4489 will work off of that VSS. This does not include the actual wiring.
Helpful?
Yes · 0
No · 0
Report
1967 Mustang
· 5 years ago
I’m upgrading a 1967 Mustang from a 302 to a 351 Windsor and looking to change out the stock gauges to your pro comps. Will this work for my vehicle?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi,
This speedometer should work in your application. You will likely need a vehicle speed sensor in your older Ford. Check the 5292:
https://www.autometer.com/hall-effect-speedometer-sender-ford-plug-in.html
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
Tony67
· 5 years ago
Hello I just changed to a SFI case power glide trans that doesn’t have a place for speedo gear do you offer a solution for drive shaft or rear end for this speedo that I already have.
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. Please look into P/N: 5289. This will allow you to convert your electronic speedometer into a GPS unit. For further assistance please call our tech line at 866-248-6357.
Helpful?
Yes · 0
No · 0
Report
Clarkoh01
· 5 years ago
I need a speedo for my project truck. I have the factory sensor in the tailstock of the Nv4500 5speed and the abs sensor in the Dana70. Which would be the better choice for the signal to the electric speedo? The rear axle sensor would have about 80,000.
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. We typically advise connecting to the VSS signal at the tailshaft rather than the rear axle sensor.
Helpful?
Yes · 2
No · 0
Report
Revamp
· 5 years ago
Will this work for use with a Chevy LS Engine?
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. The vehicle needs to have a VSS in order for the gauge to work. You can always splice into an existing VSS to feed the gauge or purchase P/N: 5291 if you are going from mechanical to electric for the speedometer. For further assistance please call our tech line at 866-248-6357.
Helpful?
Yes · 1
No · 0
Report
Km82
· 6 years ago
With this gauge would you use the 4k output from an 0411 pcm in an ls swap
1
answer
Answer this Question
Jim from AutoMeter · 6 years ago
Thank you for your inquiry. The 4489, and all of our non-GPS electric speedometers, will work with the signal directly from the VSS High wire off the speed sensor on an LS drive train.
Helpful?
Yes · 0
No · 0
Report
M1097A2
· 6 years ago
I would like to use this in a Hummer H1 with a 4L80E, is this the correct speedometer?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Yes, this should certainly work for your application.
Helpful?
Yes · 0
No · 0
Report
1–10 of 13 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE
Product #5291
$113.94
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SPEED SENSOR, UNIV. MAGNETIC, HALL EFFECT, INCL. QTY. 4 MAGNETS & BRACKET ASSY.
Product #5290
$103.15
LED BULB, REPLACEMENT, T3 WEDGE, WHITE
Product #3288
$13.72
LED BULB, REPLACEMENT, T3 WEDGE, BLUE
Product #3286
$15.46