Autometer Cobalt Digital 52.4mm Black Voltmeter

Product 6993 DESCRIPTION:
Keep tabs on the health and output of your vehicles electrical system safely and accurately with AutoMeter’s ultra precise Digital Voltmeter. With precise resolution down to a tenth of a volt, this gauge operates anywhere from 8-18 volts on negative ground electrical systems. A direct plug in wiring harnesses included for ease of installation.
Feature Points
Features AutoMeter's E-Z View Digital LED Display System which maximizes readability and minimizes distracting high speed digit changes
Gauge kit includes wiring harness, mounting hardware, and detailed instructions for installation
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Registers voltage down to a tenth of a volt
Ships With
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" VOLTMETER, 8-18V, COBALT DIGITAL
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
8
Questions
8
Answers
Questions
Ask a question
1–8 of 8 Questions
Sort by:
▼
Menu
PETER3177
· 9 months ago
i have a voltimeter with sectors with no light .... if its possible to repair?
1
answer
Answer this Question
Alex at AutoMeter · 9 months ago
Thank you for your question. If some of the segments on the display have went out you can send it into our service department for us to evaluate for you. Our service form can be found at: https://www.autometer.com/pub/media/manual/Service_Form.pdf
Helpful?
Yes · 0
No · 0
Report
Colbat
· 2 years ago
So we bought cobalt digital volt gauge showing it was compatible 16v, and good 8-18 volts, have you ever considered that a charging system on a 16v system will go above 18 volts and shut the gauge off. It should have a higher tolerance……just my opinion.
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
This gauge is designed for standard 12 volt automotive systems which have a typical charge voltage of 13.6 volts. You are correct that a 16 volt system with an alternator will likely exceed the upper range of this gauge.
Helpful?
Yes · 0
No · 0
Report
VICTOR Sakariss
· 6 years ago
Hello, I bought a A/M Volt Meter PN#6993 and i am unsure where to wire the Positive to. The instruction say to wire it to 12volt ignition switch, is it ok that my ignition switch circuit comes from the main wiring from the battery via a 60amp fuse?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Yes, that is ok. As long as you are using a 12v power source, the voltmeter will work fine.
Helpful?
Yes · 0
No · 0
Report
Baloo
· 6 years ago
Does this come in green
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. No this gauge does not come in green. It is only available in Blue.
Helpful?
Yes · 0
No · 0
Report
fits
· 6 years ago
running at the salt flats without an alt so just hook up to battery to see how much volt I use per run. Elec water pump, fans, fuel pump, and inaction of ford 4.6 turbo 5245 HP will digital vm help?
2
answers
Answer this Question
Desperadojmo · 6 years ago
Yes
Helpful?
Yes · 0
No · 0
Report
Jbwil
· 7 years ago
Are the digital gauges waterproof? I want to use them on a boat
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. AutoMeter digital gauges are not water proof and will be damaged if they get wet. You'd want to look at our Marine line of gauges for use in a boat:
https://www.autometer.com/catalogsearch/result/?q=marine#1&profile=products
Hope this helps!
Helpful?
Yes · 0
No · 0
Report
boat
· 7 years ago
we installed one on our , we run at nite and lite is to bright do u have a dimmer for this unit
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Thank you for the question. You must have the gauge power (red wire) separate from the white illumination wire, but you can dim with our 9114 Dimmer Module through the gauge's illumination wire (white).
Helpful?
Yes · 0
No · 0
Report
Mad Max
· 5 years ago
I'm using the digital votmeter on my motorcycle. Do I have to wire it to the ignition switch or can I just wire it to an on/off switch?
0
answers
Answer this Question
Ask a question
You may also like:
Also Purchased With