Autometer Factory Match Ford 52.4mm Full Sweep Electronic 0-1600 Deg F EGT/Pyrometer Gauge

Product 8444 DESCRIPTION:
Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.
Feature Points
Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
The included Type K thermocouple assures maximum accuracy and minimum response time
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Ships With
Includes Sending Unit: 5251
3256
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, FORD FACTORY MATCH
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
7
Questions
7
Answers
Questions
Ask a question
1–7 of 7 Questions
Sort by:
▼
Menu
MY1PATH
· 3 years ago
Can I change the LED to make it a different color?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
No you cannot. The Ford Factory Match features internal white LEDs that cannot be changed. Special material in the dial creates the color that matches the factory Ford lighting.
Helpful?
Yes · 1
No · 0
Report
Fairlaneguy
· 5 years ago
Can the color of the backlight for this gauge be changed to red? I have converted the dash of my 1997 Ford F-350 to red backlighting and I'm looking for gauges to match.
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
We are not able to change the color of the lighting on this gauge due to the way it is manufactured.
Helpful?
Yes · 0
No · 0
Report
hebl72
· 5 years ago
I have a pyrometer 8444 about 5years old, that has stop working. The needle is stuck at 600 degrees, on or off. Can it be repaired
2
answers
Answer this Question
Steve from AutoMeter · 5 years ago
Hello,
Thank you for your question. Please fill out the attached file in the link and mail it in with your unit. Once the unit is at our facility we will be able to notify you whether or not the unit needs to be replaced or repaired. If you have further questions please call 866-248-6356.
https://www.autometer.com/media/Service_Form.pdf
Helpful?
Yes · 0
No · 0
Report
monkey
· 5 years ago
the black, and white wires have pulled out of the plug that goes into the back of the guage. can I get a pin out so as I know where to place them?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. Here is a pin out diagram for your harness: https://www.autometer.com/media/manual/WEB-1000.pdf
Helpful?
Yes · 0
No · 0
Report
spencer1
· 6 years ago
If I already have all the wiring, is there any way I can just get the gauge itself?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Unfortunately, the gauge head is not available by itself. You can only purchase it with the sending unit and wire harness as well.
Helpful?
Yes · 0
No · 0
Report
Jay2
· 7 years ago
Is there any way to get the wiring with screw in probe for this gauge?
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Jay, thank you so much for contacting us. Here is a link to the probe/wiring for this gauge:
https://www.autometer.com/replacement-probe-harness-assy-for-full-sweep-elec-stepper-pyrometer.html
Hope this helps!
Helpful?
Yes · 0
No · 1
Report
Maxwell2018
· 5 years ago
Are the Ford matched gauges backlight dimmable? To match instrument intensity?
0
answers
Answer this Question
Ask a question
You may also like:
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" TRANSMISSION TEMPERATURE, 100-250 °F, AIR-CORE, FORD FACTORY MATCH
Product #8449
$86.33
2-1/16" HPOP PRESSURE, 0-4K PSI, STEPPER MOTOR, FORD FACTORY MATCH
Product #8496
$201.42
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, FORD FACTORY MATCH
Product #8463
$233.42
2-1/16" BOOST, 0-60 PSI, MECHANICAL, FORD FACTORY MATCH
Product #8405
$88.13
Also Purchased With
2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, FORD FACTORY MATCH
Product #8445
$221.91
2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Product #8544
$213.41
2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, GS
Product #3844
$236.99
2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, COBALT
Product #6144
$220.99
2-1/16" PYROMETER, 0-2000 °F, COBALT DIGITAL
Product #6945
$190.99
2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P310328
$263.31