Autometer Factory Match 52.4mm Full Sweep Electronic 0-100 PSI Fuel Pressure Gauge

Product 8463 DESCRIPTION:
Seeing the exact fuel pressure on your vehicle can mean the difference between extracting the most performance safely and expensive failures. AutoMeter’s Digital Stepper Motor Fuel Pressure Gauge will precisely measure your exact fuel pressure at levels of accuracy previously unheard of even in professional gauges. Designed for fuel injected or carbureted applications, our advanced 1/8” NPT solid state pressure transducer provides the best possible measurements on the market with unparalleled resistance to vibration and heat. Don’t take chances with your investment; a precise fuel pressure gauge could be the cheapest insurance you’ve ever bought. A direct plug in wiring harness is included for ease of installation and data logging is available thanks to a .5 - 4.5v analog output.
Feature Points
Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
Gauge kit includes 1/8” NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Ships With
Includes Sending Unit: 2246
Wire Harness: 5227
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, FORD FACTORY MATCH
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
6
Questions
6
Answers
Questions
Ask a question
1–6 of 6 Questions
Sort by:
▼
Menu
T.O.
· 4 years ago
Will wire harness #5223 work for this gauge? i have an aftermarket fuel pump in my truck that the provided harness is not long enough to reach.
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Yes, this would work.
Helpful?
Yes · 0
No · 0
Report
Scott 4JB1
· 4 years ago
Hi there, The install instructions on this gauge implies that, it can be used for oil pressure as well, is this correct?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. It can be used for fuel or oil pressure.
Helpful?
Yes · 0
No · 0
Report
Anonymous · 6 years ago
my 8463 for a 95 7.3 has a 6 wires out 3 of which are in a plug where does it connect
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. The plug connects to our pressure sensor #2246 which should have came with your gauge. If it did not, it is available separately. The other three wires should be red for 12v power, black for ground, and white for gauge lighting.
Helpful?
Yes · 0
No · 0
Report
Logan45
· 6 years ago
Hi guys quick question, would this work with a diesel application? I'm working on a 7.3idi and trying to install some more precision gauges than the factory "general range" ones.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Yes, this gauge can be used on a diesel application.
Helpful?
Yes · 0
No · 0
Report
IkeC
· 7 years ago
Do these gauges have green background lighting in them?
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Hi there, thank you so much for the question. Yes, the Ford Factory Match gauges feature green lighting. We show a representation of the lighting for the pyrometer that you can see here in the additional images: https://www.autometer.com/2-1-16-pyro-kit-0-1600-fse-ford-factory-match.html
Helpful?
Yes · 1
No · 0
Report
Mark
· 7 years ago
Do you guys make a Volt gauge and an Engine Oil Temp gauge in the Factory Match For the Super Duty? Could a guy get them custom made? If so, how much?
1
answer
Answer this Question
Joseph Mills · 7 years ago
Thank you so much for contacting us. We don't currently offer those gauges in that series. Because of the way the dials are built (they're engraved rather than simply printed to work with our LED, through the dal lighting), it's not something we could cost effectively do as a custom.
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
FITTING, ADAPTER, 1/8" NPTF FEMALE TO 1/16" NPT MALE, FOR FORD FUEL RAIL
Product #3280
$16.64
FITTING, ADAPTER, -4AN MALE TO 1/16" NPT MALE, FOR FORD FUEL RAIL
Product #3275
$16.81
FITTING, ADAPTER, M12x1.25 BANJO BOLT TO 1/8" NPTF FEMALE, FUEL PRESSURE
Product #2276
$17.86
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, FORD FACTORY MATCH
Product #8444
$208.99
2-1/16" BOOST, 0-60 PSI, MECHANICAL, FORD FACTORY MATCH
Product #8405
$88.13
Also Purchased With
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Product #8563
$229.99
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, GS
Product #3863
$290.71
2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, COBALT
Product #6161
$230.14
2-1/16" FUEL PRESSURE, 5-100 PSI, COBALT DIGITAL
Product #6963
$273.75
2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P316328
$305.16