Autometer Factory Match 52.4mm Full Sweep Electronic 0-1600 Deg F EGT/Pyrometer Gauge

Product 8544 DESCRIPTION:
Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.
Feature Points
Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
The included Type K thermocouple assures maximum accuracy and minimum response time
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Ships With
Includes Sending Unit: 5251
3256
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
5
Questions
5
Answers
Questions
Ask a question
1–5 of 5 Questions
Sort by:
▼
Menu
chuc 2963
· 4 years ago
my light doesn't work any longer,can the bulb be replaced.
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Since this is an LED, the light cannot be replaced.
Helpful?
Yes · 0
No · 0
Report
dodge 3500
· 5 years ago
does this come with the thermal couple or is it just the gauge?
1
answer
Answer this Question
BL24 · 5 years ago
Comes with everything needed to install it, with the exception of the pod.
Helpful?
Yes · 0
No · 0
Report
Whitell
· 5 years ago
can i order the third gen dodge gauge with a chrome bezel?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. You can special order this gauge with a chrome bezel for an additional $25. You will need to call us in order to place a special order. You can reach us at 815.895.8141
Helpful?
Yes · 0
No · 0
Report
Jbush
· 6 years ago
I bought this gauge but want the thermocouple that is npt thread to go in my manifold can I get a part number please
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. The gauge and thermocouple should have included fitting #3256 which would be an 1/8" NPT fitting. You can also consider using #5255 which would be an 1/8" NPT compression fitting and a 1/8" NPT female weld fitting.
Helpful?
Yes · 0
No · 0
Report
Uncle Bunny
· 6 years ago
Do the pyro, boost, and fuel pressure gages fit a 2009 dodge 3500?
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. They will work with your vehicle, however, you will need some type of gauge pod or panel to install them in as they are not made to fit the factory holes in your dash.
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" BOOST, 0-60 PSI, MECHANICAL, GEN 3 DODGE FACTORY MATCH
Product #8505
$92.99
2-1/16" TRANSMISSION TEMPERATURE, 100-250 °F, AIR-CORE, GEN 3 DODGE FACTORY MATCH
Product #8549
$90.31
2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Product #8560
$232.99
2-1/16" FUEL RAIL PRESSURE, 0-30K PSI, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Product #8586
$261.50
2-1/16" EXHAUST PRESSURE, 0-60 PSI, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Product #8592
$290.71
Also Purchased With
2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, GEN 3 DODGE FACTORY MATCH
Product #8545
$217.58
2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, SPEK-PRO, WHITE DIAL, BLACK BEZEL, CLEAR LENS
Product #P31012
$299.00
2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, SPEK-PRO, WHITE DIAL, BLACK BEZEL, FLAT ANTIGLARE LENS
Product #P310128
$299.00