Autometer Gen4 Dodge Factory Match 52.4mm Full Sweep Electronic 0-2000 Deg F EGT/Pyrometer Gauge

Product 8547 DESCRIPTION:
Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.
Feature Points
Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
The included Type K thermocouple assures maximum accuracy and minimum response time
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Ships With
Includes Sending Unit: 5251
3256
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Atlanta, Ga
Review 1
Votes 0
*
Verified Purchaser
★★★★★
★★★★★
5 out of 5 stars.
Good like I expected
Autometer isn’t new to the game. Products have performed for many decades. Matches my factory gauges flawlessly.
Recommends this product ✔ Yes
Pyrometer gauge
Photo This action will open a modal dialog.
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
5 out of 5 stars. Read reviews for 2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
5.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
3
Questions
3
Answers
Questions
Ask a question
1–3 of 3 Questions
Sort by:
▼
Menu
Immortan Joe
· 6 months ago
Does PN 5251 come with the fitting to install in manifold?
1
answer
Answer this Question
Jim from AutoMeter · 6 months ago
The 5251 does come with the 1/8" NPT fitting.
Helpful?
Yes · 1
No · 0
Report
Davis1234
· 5 years ago
I have a factory matched 0-2000° pyro for my dodge but I quit reading. Gauges lights up and all thinking maybe the thermocoupler burnt out. So I need a part number on the correct replacement one that I need
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. The replacement sensor needed is P/N: 5251.
Helpful?
Yes · 1
No · 0
Report
svmech2017
· 7 years ago
I have purchased 2 pyrometers now and both have no internal lighting, the gauge itself works correctly however the backlight does not illuminate one was a 8546 and the other an 8547, any help is appreciated
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. If you're able to measure greater than 12.0VDC on the illumination wire at the back of the gauge, we'd probably need to take a look at them in our shop to see what's going on. The LED illumination should pretty much run forever without any issues. There are a number of LEDs integrated into the circuit board. It would be very unlikely for even one to go out, let alone all of them. It bears mentioning that LED lit gauges do need to use an LED dimmer (like our 9114) as they can potentially be damaged using a conventional linear rheostat dimmer.
If they check out in terms of voltage, you can use this form to send them to us for inspection:
http://www.autometer.com/media/Service_Form.pdf
There's never any charge fro diagnosis and if there is a problem that would necessitate a charge, it would be minimal. Hope this helps!
Helpful?
Yes · 1
No · 0
Report
Ask a question
You may also like:
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" BOOST, 0-100 PSI, MECHANICAL, GEN 4 DODGE FACTORY MATCH
Product #8509
$94.88
2-1/16" TRANSMISSION TEMPERATURE, 100-250 °F, AIR-CORE, GEN 4 DODGE FACTORY MATCH
Product #8550
$105.99
2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
Product #8561
$232.19
2-1/16" FUEL RAIL PRESSURE, 0-30K PSI, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
Product #8594
$215.99
2-1/16", PEDESTAL W/ BLACK CUP
Product #2204
$28.33
Also Purchased With
2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
Product #8546
$217.87
2-1/16" PYROMETER, 0-2000 °F, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, CHROME BEZEL, CLEAR LENS
Product #P31031
$299.00