Autometer Factory Match 52.4mm Full Sweep Electronic 0-30 PSI Fuel Pressure Gauge Dodge 4th Gen

Product 8561 DESCRIPTION:
Seeing the exact fuel pressure on your vehicle can mean the difference between extracting the most performance safely and expensive failures. AutoMeter’s Digital Stepper Motor Fuel Pressure Gauge will precisely measure your exact fuel pressure at levels of accuracy previously unheard of even in professional gauges. Designed for fuel injected or carbureted applications, our advanced 1/8” NPT solid state pressure transducer provides the best possible measurements on the market with unparalleled resistance to vibration and heat. Don’t take chances with your investment; a precise fuel pressure gauge could be the cheapest insurance you’ve ever bought. A direct plug in wiring harness is included for ease of installation and data logging is available thanks to a .5 - 4.5v analog output.
IMPORTANT NOTE TO DODGE DIESEL OWNERS. CLICK HERE
Feature Points
Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments
AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
Gauge kit includes 1/8” NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Ships With
Includes Sending Unit: 2239
Wire Harness: 5227
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
3
Questions
3
Answers
Questions
Ask a question
1–3 of 3 Questions
Sort by:
▼
Menu
Billy12
· 5 years ago
do the gauges come with the sending units
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. All our electric gauges that need to be used with our specific sending units will include the sending units with the gauge. That includes this gauge, it will come with the sending unit it uses.
Helpful?
Yes · 1
No · 0
Report
Jimmy9342
· 6 years ago
I bought a fuel pressure gauge 8561 used but did wiring I need to know the part numbers of what I need to do the install thanks
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. The wire harness for this gauge is #8561, and the sensor is #2239. The only other thing you may need is adapters for the sensor, but that will vary per application.
Helpful?
Yes · 0
No · 0
Report
Joshy
· 7 years ago
Are the factory matched 4th Gen gauges designed to dim using the factory switch or is it on and off only
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Hi Joshy, thank you so much for contacting us. They will be on an off only, though you can wire a 9114 dimmer module in series with the output from your factory dimmer. This will allow you to fine tune the gauges using the 9114, tuck it out of the way and then use only the factory dimmer.
https://www.autometer.com/led-lighting-dimmer.html
Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
FITTING, SNUBBER ADAPTER, 1/8" NPT MALE TO 1/8" NPT FEMALE, STEEL, FOR FUEL PRESSURE
Product #3279
$29.41
LINE, BRAIDED STAINLESS STEEL, #4 DIA., 3FT. LENGTH, -4AN AND 1/8" NPTF FITTINGS
Product #3227
$60.03
2-1/16" BOOST, 0-60 PSI, MECHANICAL, GEN 4 DODGE FACTORY MATCH
Product #8508
$94.20
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" PYROMETER, 0-1600 °F, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
Product #8546
$217.87
2-1/16" TRANSMISSION TEMPERATURE, 100-250 °F, AIR-CORE, GEN 4 DODGE FACTORY MATCH
Product #8550
$105.99
Also Purchased With
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, GEN 4 DODGE FACTORY MATCH
Product #8564
$244.82
2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, SPEK-PRO, BLACK DIAL, CHROME BEZEL, CLEAR LENS
Product #P31631
$305.16